Added by Joseph M. on March 29, 2011 at 11:00am — No Comments
In March I moved in with my girlfriend and neither one of us had a dining room table. I told her don't worry, I'll make us one. She asked me if I knew how to create one, so I took her here to this site and showed her all of my previous projects. After she saw the pie safe, she basically said, "OK, if you know how to make one of those, then you know how to make a dining room table. I trust you."
I did have to tell her, though, that I'm not a chair maker. We'd have to find…
ContinueAdded by Don Grubish on March 28, 2011 at 1:00pm — 2 Comments
Kreg Klamp Table
Pros: Durable, Versatile, Heavy…
Added by Steve Gronsky on January 23, 2011 at 3:53pm — 5 Comments
Added by Mike McGuire on December 1, 2010 at 1:00pm — 9 Comments
w00t! Today I'm headed to the Denver Woodworking show! I'm all excited, I was hoping to have gone yesterday but had some "honey-do's" that needed to get done first in prep for our early Xmas gifts.
What makes me excited about attending the show is that as a new woodworker, I can get better exposure to all the cool stuff out there than say an afternoon in a single store. Plus there are a couple of seminars I'm pretty excited to attend, Jim Harvey's and the pen turning. I'm…
ContinueAdded by Steven R. Hulse on November 21, 2010 at 11:02pm — 1 Comment
Wow, it’s been a long time since I’ve written, but I have still kept woodworking, trust me. 2010 has been a whirlwind ride, that’s for sure. A new girlfriend, a new job, moving soon into a new townhouse, you name it. I didn’t forget about anyone, just had a lot on my plate this year.
One of the…
ContinueAdded by Don Grubish on November 16, 2010 at 4:41pm — 9 Comments
Added by Joseph M. on November 10, 2010 at 5:34pm — 5 Comments
Added by Merrill Hayes on November 7, 2010 at 1:10pm — 3 Comments
I remember when I was a kid I would always look forward to the Sears and JC Penny wishbooks. I would spend hours going over the pages of all the cool stuff, toys, musical instruments, women's underwear sections. Oh wait, I never did that! ;-)
Recently I got the big Grizzly catalog and it threw me back to those days as a kid. I immediately dropped all the other mail on my desk and went over to the couch and began flipping through those magical pages. I was whisked away to my…
ContinueAdded by Steven R. Hulse on November 4, 2010 at 11:00pm — 6 Comments
Added by Kerry Drake on September 6, 2010 at 3:09pm — 2 Comments
Added by Kerry Drake on August 28, 2010 at 7:22pm — 1 Comment
Added by Kerry Drake on August 23, 2010 at 2:44pm — 6 Comments
I have just finished building a deck using the Kreg Deck Jig. This is the third home deck I have built, hope it is my last. The first deck built in the 50's we used galvenized nails to hold the decking down, and every year or so pounded the old nails down and added some new ones. The second deck, built in the 70's, I used spiral galvenized screws that had much better holding but over some years still had to be reseated. This new deck has the Kreg screws that are seated on the edges rather…
ContinueAdded by Robert Orr on July 29, 2010 at 7:09pm — 2 Comments
As soon as I got back to the shop with the tool, I inverted my 71/4 circle saw and adjusted the tool. I set the guide arm so that it was just inside the teeth on the blade. My blade has staggered teeth. Then I drew my cut line. I then set the guide arm just inside the mark, bingo! Just what I wanted. There is one other thing that I did. The stock was firmly clamped. There is 10 rubber feet on the tool. I set the tool in place, fired up one of my KREG clamps, and, firmly but…
ContinueAdded by Buck R. Fleshner on June 20, 2010 at 1:02am — 12 Comments
where can i find plans for and childs table and chairs?
Added by Kevin J. Kelly on June 10, 2010 at 5:38pm — No Comments
Added by Hugh Clare on May 31, 2010 at 9:50am — 4 Comments
LETS PUT WOODWORKING ASIDE FOR A MOMENT AND SALUTE THE MEN AND WOMEN THAT GAVE THERE LIVES FOR OUR COUNTRY.
SUPPORT OUR TROOPS
GOD BLESS AMERICA
Added by Mike rignola on May 28, 2010 at 9:49pm — 1 Comment
I went to the new website and had a problem signing on as an new member because I found that Alaska is not listed as being in the United States. Upon closer inspection I noticed that Hawaii is also aparently not part of the United States either. According to my history teacher Alaska is the 49 th state in the union and Hawaii is the last to date as the 50th. I and most alaskan's and folks from Hawaii would appreciate it if you could rectifiy that little problem.
Now that being…
ContinueAdded by Garry Cason on May 27, 2010 at 12:17am — 5 Comments
Added by Don Clark on May 25, 2010 at 6:17pm — 4 Comments
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service