Kreg Owners' Community

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.

Views: 2248

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Mike Goetzke on January 25, 2019 at 11:26am

Glenn - very impressive for sure. Ha - what a tease showing those long extrusions.

I see you have a lot of green in the background. I have a couple of the MPC's and have a track saw. I've been using 1x4 standoffs on top of them for breaking down sheet goods so I don't damage the MPC tops. Before I over think something have you come up with a cutting board solution for the MPC?

Thanks - Mike

Comment by Chris Maher on May 11, 2018 at 6:04pm

An additional comment- I too would like to learn where I can buy two of the “T” channel connection pieces to connect my second workcenter (as soon as I can swing it).

Finally, I really feel for our southern neighbors in Aussie land and their plight in obtaining them! What gives?

Comment by Chris Maher on May 11, 2018 at 5:59pm

I got mine last week. Impressive isn’t a strong enough term! I’m going to submit a side by side of my previous “workcenter” with my story as soon as I let myself take it downstairs to my shop. I love the thought that was put into its design(and at such a reasonable price). I have several of the “T” channel clamps and the K5 hole drilling clamp which I am excited to use with the workcenter. I should’ve bought two of them!

Chris Maher

Atlanta Ga

Comment by Lisa Nagel on April 26, 2018 at 11:35pm

This is awesome!  Can you tell me where you found the material for the side rails?  It appears the clamps will work in those rails....

Comment by KregRep on April 5, 2018 at 9:38am

Thanks for sharing! Glad to hear, and see, that you're enjoying your new Mobile Project Centers! 

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Drawer Slide Jig - How to fit bottom drawer?

Hi guys.I'm probably being really stupid here, but I cant see any way to use the drawer slide jig to fit the bottom drawer of a set?I actually have a couple of questions:Firstly, should the drawer slide fit flush with the bottom of the drawer?(That…Continue

Started by Craig in Beginners' Zone on Sunday.

Combination Pocket Hole and Tongue & Groove Joint

All material is 3/4"Tongue & groove is 1/4" tongue into a 1/4" grooveMy thinking is to set the jig and bit as though I was using 1" stock.  Use the screw called out for 3/4" material.  Is my thinking correct.ThanksGeorgeContinue

Started by George in Beginners' Zone Jun 13.

Product Reviews

Kreg Jig Dust Collection Attachment

1st impression when you hold this attachment in your hand:  "not much to it", Kreg sure is makin' $$ here.



Then I installed it.. perfect fit, leaves just enough room to adjust the setting screw on my K4.



Then the real test, hook…

Continue

Posted by Grampy Meyer on February 23, 2020 at 11:36am

My K4 Master System

I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…

Continue

Posted by Randy W. Lush on August 25, 2019 at 12:30pm

© 2020   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_