Saturday my wife and I got up early (for us, on a Saturday) and hit the road to drive down to Marlborough, Massachusetts to attend a woodworking show I had found online a few weeks ago. We made the 86 miles drive in bright sunshine and good spirits, arriving at our destination 10 minutes before the show was scheduled to start that day (the website advertising a 3 day event, Fri - Sun).
Imagine our surprise to show up and find an empty ... nay, a…
All Product Reviews (245)
Dog Grooming Table
I got a call from my niece, Becky, who is going to college, and has a part time job as a dog groomer. You might remember the sign I woodburned for Dogs at Play. That's the place she works at in South St. Paul, MN. She called me because she said her grooming table is falling apart, and could her super-favorite uncle in the whole wide world come to her rescue? (I added the adjectives there, myself) I said sure, and would arrive after work on Monday the 22nd of March.
When I…
ContinueAdded by Don Grubish on March 23, 2010 at 10:30pm — 3 Comments
Introducing the all-new Kreg Deck Jig™
Added by KregRep on March 23, 2010 at 5:00pm — 43 Comments
The Kreg Jig Multi-Mark
Last Thursday I received my Multi-Mark in the mail. I opened my package and pulled out the tool. I couldn't wait to open this thing up and try it out. It's a quick assembly of putting the metal guage slide to the plastic handle and screwing tight the brass knob. The tool allows for 90 degree square, 45 degree angle, and 0 degree straight edge. I was also happy to see that a leveling bubble was included in the plastic handle too. One can always use one of those.
I grew up…
ContinueAdded by Don Grubish on March 21, 2010 at 9:30pm — No Comments
Pros and cons of finishing before assembly
As far back as I can remember building things (since I was old enough to hold a hammer) I have always assembled whatever project I was working on then finished it. Whether a table or a loft bed, it just seemed the thing to do. Of course some projects (such as the loft bed complete with stairs and slide!) were a no brainer... too big to paint before assembly.
Recently I invested in some pricey, "top-of-the-line"…
ContinueAdded by Kim C on March 19, 2010 at 8:00am — 14 Comments
A counter top you can count on...
Got to spend quite a bit of time the shop this weekend and made a bit a progress on both of the pending projects.
The Cherry Counter Top for the Built-In
I got out my Kreg Mini and set about drilling 20 pocket holes in the center board of the counter top (10 on each side). I got the Mini free when I ordered on of the Kreg clamps I got, and this thing is a joy to use on big pieces like this and I don't have to take my regular Kreg apart.…
Continue
The Cherry Counter Top for the Built-In
I got out my Kreg Mini and set about drilling 20 pocket holes in the center board of the counter top (10 on each side). I got the Mini free when I ordered on of the Kreg clamps I got, and this thing is a joy to use on big pieces like this and I don't have to take my regular Kreg apart.…
Continue
Added by Kerry Drake on March 15, 2010 at 10:26am — 3 Comments
Best and Cheapest Addition to the KREG JIG
When your drill or screw driver just can't get in that tight place you want it to. Instead of scraping the project I advise going to your local Lowe's. Why? Well for the Kobalt 9 Piece Multi Bit Ratchet Screwdriver. By far the best $9.58 you could ever spend to ride along during any tight angle project you might be devising with your Kreg.
Added by Craig Helming on March 13, 2010 at 11:58pm — 5 Comments
Hello Kreggers!
Hi, like Alan, I am new to woodworking. I just finished my first project, and I'm ready for my next one. I have been looking at the website for a while admiring the work. I've been looking for ideas, and I have found a bunch. I'm getting ready to get started remoldeling my bathroom so I know the kreg-jig is gonna be on overtime. I look forward to chatting with as many of you as possible. By the way, I'm a steel-fitter by day, so it is nice to be able to come home and work with wood. My dad is a… Continue
Added by Levi Lester on March 10, 2010 at 5:59pm — 3 Comments
Step one in becoming a novice :)
Well i've cleaned up my shop a little. It was not used for a long period of time, so it collected a lot of stuff. By a lot, I mean I literally took 1/2 ton of trash to the dump over the weekend. Glad I have my truck :)
Continue
Shop before:
And the shop as it is now:…
Kitchen Cabinet Repair
Greetings to All. Jody and I have 8 kids total. 5 still at home. We live in a large log home that we built ourselves. The kitchen does have alot of wear and tear. The cabinets are about 10 years old. They are still in pretty good shape. It seems that when the kids open the cabinets they put a lot of downward pressure on the doors. Over time the doors loosen up and come apart. I have repaired some of them before with glue and clamps, but they never hold. Its been quite a while since a got my… Continue
Added by T Corey on March 3, 2010 at 2:11pm — 10 Comments
Hello Everyone
Hello everyone. I'm new to both here and to woodworking and to using the Kreg jig. I'm sure I'll ask some simpleton questions, so forgive me in advance. I've been skulking around this site for a while, and I eventually just couldn't help myself, so I purchased the Kreg jig system when I saw it at my local home improvement store. I used it just yesterday for the first time seriously, and I love it. I had to rebuild a drawer in my aging kitchen cabinets. The Kreg jig made the joinery very… Continue
Added by Alan on March 2, 2010 at 10:00am — 6 Comments
Built In Fireplace and TV Cabinet
Anyone ever tried building a TV/Fireplace built in cabinet before? I would really like to put one together, have been looking at several designs that I like but would LOVE to use my Kreg Jig on it as much as possible. I'm also looking for some good Euro style cabinet plans if anyone has some. Feel free to shoot me and email- awedmore@hotmail.com
Thanks!
Added by Adam Wedmore on February 28, 2010 at 12:21am — 2 Comments
pressure treated pine
Hello again friends, I was wondering if anyone knows offhand which blue kotes i should use for pressure treated pine. Coarse or fine?
Added by david almond on February 27, 2010 at 4:14pm — 2 Comments
Just getting started and I need Plans for Kreg Jig Projects!
I have the tool. I made a chair. Now i'm hooked. But I can't find the site where I found the plan for the chair nor any other place with free plans for making cool things with Kreg. Where can I find a library of plans especially for Kreg Jig?
Added by Dave Diamond on February 24, 2010 at 3:49pm — 1 Comment
Kreg Precision Trak & Stops - Fence/Table
I've never written a blog before so I hope this is how it's supposed to be done.
I purchased the Kreg K3 Master System a short time back. I have now completed 2 of the bookcases that are available on the Kreg site. I found it necessary to modify the dimensions some on the 2nd case so that it would fit into a particular niche in our kitchen.
As I worked these two projects I found that I was in "need" of precise cuts on the… Continue
I purchased the Kreg K3 Master System a short time back. I have now completed 2 of the bookcases that are available on the Kreg site. I found it necessary to modify the dimensions some on the 2nd case so that it would fit into a particular niche in our kitchen.
As I worked these two projects I found that I was in "need" of precise cuts on the… Continue
Added by Steve Gronsky on February 22, 2010 at 8:16pm — 3 Comments
The Phantom Woodworking Show
Added by Kerry Drake on February 22, 2010 at 11:40am — 4 Comments
Dimensional Furniture- Pieces 3 & 4
Well I have finally completed my 2nd bookcase. The first was done several months ago and is serving me well. The 2nd is a smaller version for use as bookshelf and display space.
Like my desk and hutch previously posted these are made out of standard box store lumber and the Kreg Jig was my primary joint. I am looking forward to years of use as well as a few more pieces to add to the…
ContinueAdded by Chris L on February 17, 2010 at 1:25pm — 2 Comments
Life's a Birch ... with a Cherry top.
Monday my beautiful wife and I went to Goose Bay Lumber to pick out lumber for the top of the built in. I wanted something a little thicker than you find at a big box store, so we were looking for 6/4 material (that's 1 1/2" thick to you lay folk).
We ended up with 3 nice pieces of Cherry all 10 feet long, 2 pieces about 7 inches wide and one 4" (25 board feet). Here is it stacked up on the work… Continue
We ended up with 3 nice pieces of Cherry all 10 feet long, 2 pieces about 7 inches wide and one 4" (25 board feet). Here is it stacked up on the work… Continue
Added by Kerry Drake on February 16, 2010 at 4:32pm — 2 Comments
Introducing the all-new Kreg Crown-Pro™
Added by KregRep on February 11, 2010 at 9:00am — 29 Comments
Introducing the all-new Kreg Multi-Mark™
Added by KregRep on February 10, 2010 at 9:00am — 57 Comments
Introducing the all-new Kreg Square-Cut™
Added by KregRep on February 9, 2010 at 5:00pm — 72 Comments
Latest Product Reviews
Most Popular Product Reviews
Monthly Archives
2024
- August (1)
2021
- February (1)
2020
2019
2018
2017
2016
2015
- December (1)
- November (1)
- October (1)
- September (3)
- August (1)
- July (1)
- May (2)
- April (1)
- March (2)
- February (3)
- January (1)
2014
- December (1)
- November (1)
- September (2)
- August (2)
- July (3)
- June (3)
- May (3)
- April (1)
- March (2)
- February (2)
- January (4)
2013
2012
- December (1)
- November (2)
- October (2)
- September (1)
- August (3)
- July (8)
- June (1)
- May (4)
- April (3)
- March (1)
- February (1)
2011
2010
- December (1)
- November (7)
- September (1)
- August (4)
- July (1)
- June (4)
- May (14)
- April (73)
- March (16)
- February (18)
- January (27)
2009
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Free Hand Guard (dust collection)
Hi. I'm wondering if anyone has used the Woodpecker Free Hand Guard for dust collection on their bench top router table during pattern routing. How effective is it? It's adaptable to any router table. Continue
Started by Keith Morgan in Beginners' Zone Nov 8.
Keg Easy-Step Collar and XL 1 Reply
Does Keg Easy-Step Collar work with Kreg XL?
Started by Nick in Beginners' Zone. Last reply by Ken Darga Oct 28.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
