After making the DVD shelf as far as I could take it, I wasn't done putzing around in the shop. A friend from work gave me some scrap 2x4s and 1/8 inch paneling. I had some caster wheels my brother Denny gave me, and knew that I was tired of "dancing" with my mitre saw every time I wanted it out of the way. Well, some ingenious afternoon thinking led me to this roller rack I made. This baby makes getting my mitre saw out of my way soooo much easier!…
ContinueAdded by Don Grubish on February 8, 2010 at 11:09pm — 3 Comments
Recently I was asked if I was interested in making a shelving unit for a coworker. She has a son that is big into movies, and she needed him to keep his DVD collection nice and organized. She didn't have a large budget, so she came to me to design her something that fit her dimensions. She said it should be no higher than 64", and no wider than 18". Also, it had to have seven shelves. Well, I went to Menards and saw that aspen pine was on sale, so I told her the cost would be $40, and I…
ContinueAdded by Don Grubish on February 8, 2010 at 11:00pm — 23 Comments
I already have a table saw (portable Ryobi), and many hand tools including a plunge router. My space is limited for the time being and I am using my carport for any projects, so most of my future purchases will be the bench model variety.
IF, you were going to buy only one of the following tools (assuming they all cost about the same), which would you buy next.
Drill Press
Band Saw
12 inch planer
Combination…
ContinueAdded by Steve McCullough on February 8, 2010 at 4:31pm — 10 Comments
I'm real sore today, but that should be expected as I spent almost 4 hours on my knees yesterday (no, get your mind out of the gutter). I finally got all the drawer fronts finished with a final coat of stain and poly and it was time to install them.
For those who may have forgotten, this is what we started with way back when:…
Added by Kerry Drake on February 8, 2010 at 3:06pm — 8 Comments
Added by Kim C on February 4, 2010 at 10:06am — 20 Comments
Added by Kim C on February 1, 2010 at 1:49pm — 12 Comments
Added by Kerry Drake on February 1, 2010 at 11:29am — 3 Comments
Added by Jenny on January 31, 2010 at 12:44pm — 14 Comments
Added by Jenny on January 30, 2010 at 12:28pm — 3 Comments
Added by Tom Cook on January 27, 2010 at 10:33pm — 15 Comments
Added by Kerry Drake on January 27, 2010 at 1:28pm — 6 Comments
Added by Don Husslein on January 26, 2010 at 12:52pm — 2 Comments
Added by Grant Montgomery on January 26, 2010 at 11:00am — 2 Comments
Added by Jonathan Gelaude on January 26, 2010 at 10:30am — 1 Comment
Added by Kerry Drake on January 25, 2010 at 12:27pm — 2 Comments
Added by Don Grubish on January 19, 2010 at 11:45pm — 9 Comments
Added by Kevin P. Thornton on January 19, 2010 at 11:41pm — 2 Comments
Added by Kevin P. Thornton on January 19, 2010 at 11:30pm — 5 Comments
Added by Kevin P. Thornton on January 19, 2010 at 11:00pm — 3 Comments
Added by Chuck M on January 19, 2010 at 10:00am — 11 Comments
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service