Kreg Owners' Community

Hi all just bought some timber here wow its got expensive.6"x1" pine is now $1.60/£1 per foot.And western red cedar is hold on to your hats $4.81/£3 per foot.Interested to know the price for prepared timber over in the States see how it compares to UK prices,any ideas folks.?

Views: 437

Reply to This

Replies to This Discussion

Mike,

If I were you, I'd be heading to a graveyard of wood ships, and salvage some timber.

Maybe build with brick  cheaper and no termites eating your investmant

Hi ken ,i try to recycle alot of timber when i can.I get the impression timber there more readily available than the UK .And cheaper is that generally true Ken?

Bricks more expensive here Jens,we dont get termites maybe its too cold.We do get a small beetle called woodworm.Jens why are so many houses in the states built of timber?Especially if their is a termite problem.Is it cost?
 
Jens Jensen said:

Maybe build with brick  cheaper and no termites eating your investmant

Mike,

I'm not familiar with the prices of lumber, in the UK.

I buy whats desirable for the project at hand,

and use reclaimed materials, as applicable, for misc products, and the like. 



michael evans said:

Hi ken ,i try to recycle alot of timber when i can.I get the impression timber there more readily available than the UK .And cheaper is that generally true Ken?

Reason is old retired brickmasons like me are gone  hahah .I have no idea cause brickwork here is really expensive  and the true craftsman just dont get opportunity do do as good ljobs as in past when you need to pay a union mason 30-40 per hour.plus bennies .Also to there is so much decrative brick that all you need is squirt gun and stick it on wall  and then tuckpoint afterwards.

michael evans said:

Bricks more expensive here Jens,we dont get termites maybe its too cold.We do get a small beetle called woodworm.Jens why are so many houses in the states built of timber?Especially if their is a termite problem.Is it cost?
 
Jens Jensen said:

Maybe build with brick  cheaper and no termites eating your investmant

Jens,

I've always admired the brickmasons and stonemasons work of art---

some beautiful structures were created.

It took lots of skill to construct those creations.

How did they do it in the days of the Romans, without using a Bosch HammerDrill & chisel?

Just good old hard work and no whiners

Hi ken ,what i was after was the price of 6"x1" pine and the price of red cedar 6"x1"per foot in the states to compare with the uk prices that i posted earlier ,just curious cheers Ken.
 
Ken Darga said:

Mike,

I'm not familiar with the prices of lumber, in the UK.

I buy whats desirable for the project at hand,

and use reclaimed materials, as applicable, for misc products, and the like. 



michael evans said:

Hi ken ,i try to recycle alot of timber when i can.I get the impression timber there more readily available than the UK .And cheaper is that generally true Ken?

6"x1" choice pine--- $2 per  ft

red cedar 8"x 1" ---$1.25 per foot

(local home depot $$$)

Lowes and Menards are also local, but I haven't checked their current prices.

I generally do that when I making out my material order list for the project.

For most projects, I buy larger/wider pieces and rip them.

Ex, it's more cost effective if I buy a 1x8, rip it, to make 1x4 aprons.

Plus, it gives me cut-offs for other uses.



michael evans said:

Hi ken ,what i was after was the price of 6"x1" pine and the price of red cedar 6"x1"per foot in the states to compare with the uk prices that i posted earlier ,just curious cheers Ken.
 

Thanks Ken for those prices.Pine fairly similiar to here in the uk,but cedar three times as much here in UK .I guess somethings here in the uk cheaper,its all relative too where we live i guess.One item that is expensive here is petrol/gas £ 1.30 per litre about $2.30 roughly.60 per cent goverment tax.
 
Ken Darga said:

6"x1" choice pine--- $2 per  ft

red cedar 8"x 1" ---$1.25 per foot

(local home depot $$$)

Lowes and Menards are also local, but I haven't checked their current prices.

I generally do that when I making out my material order list for the project.

For most projects, I buy larger/wider pieces and rip them.

Ex, it's more cost effective if I buy a 1x8, rip it, to make 1x4 aprons.

Plus, it gives me cut-offs for other uses.



michael evans said:

Hi ken ,what i was after was the price of 6"x1" pine and the price of red cedar 6"x1"per foot in the states to compare with the uk prices that i posted earlier ,just curious cheers Ken.
 

Mike,

There is only a small volume of yellow and red cedar exported to the European countries---

perhaps one of the reasons for it's high costs.

http://commerce.alaska.gov/ded/dev/forest_products/pub/tree12f.pdf

Perhaps design and make your wood products from more readily available and cost effective lumber materials.


 

 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_