Tags:
Hmmm Kreg 1 router 0
I don't use screws anywhere near I think I will be routing. Since you glued it you could have removed the screws before routing although this would have left a hole to patch.
Bottom line - bummer
For edge trimming/banding, that would get rounded, or the like, I'd go with biscuit joints or a splined joinery and glued---
without any screws, brads or nails.
In edge banding, there are times, when one cannot get a ''closed'' tight fitting joint, so as to get an almost seamless appearance. To accomplish the feature, the surfaces would need to be super-straight and smooth, otherwise there'll be slight gaps, or hair-line cracks, which will need to be filled and finished---
tough task for many to accomplish.
Screws may not draw the joints tight enough, to achieve a closed/tight fitted seam.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service