Kreg Owners' Community

Michael Campbell's Discussions (68)

Discussions Replied To (63) Replies Latest Activity

"good call on that Christopher,, I have had a lot of luck on Craigslist also...keep m…"

Michael Campbell replied Oct 1, 2012 to miter or table?

53 Oct 1, 2012
Reply by Michael Campbell

"Thank you Ken Jim and David,  I found the plans for the one I have pictured on woodc…"

Michael Campbell replied Jun 5, 2012 to Rocking horse

4 Jun 5, 2012
Reply by Michael Campbell

"need a better visual of your table.  Is the top only sitting on the apron or is the…"

Michael Campbell replied May 22, 2012 to Joining Apron pieces 45 degree angles

3 May 23, 2012
Reply by Jason Watkins

"Heath, looks like a nice project.  I build alot of cabinets and when I plan on paint…"

Michael Campbell replied Feb 1, 2012 to Wood choice?

8 Feb 1, 2012
Reply by Michael Campbell

"Dan,  I think the brad nailer is outdated.  I use a 15 ga. angle nailer and a headle…"

Michael Campbell replied Dec 30, 2011 to Pneumatic nailers

9 Jan 1, 2012
Reply by Chad Stoner

"I usually don't use plugs cause my holes are hidden,  but I will keep that tip.  Tha…"

Michael Campbell replied Dec 8, 2011 to pocket hole plugs

6 Dec 10, 2011
Reply by Ken Darga

"The wood craft in Houston still has some, seen 10 or so yesterday.  I have been usin…"

Michael Campbell replied Dec 8, 2011 to Kreg Toolboxx Sold Out?

17 Jan 12, 2012
Reply by Paula Geihs

"Yes Bruce the Kreg jig will work fine for that and I always use glue.  Here is a pic…"

Michael Campbell replied Dec 5, 2011 to Using kregg jig to put together a top measuring 20 inches by 75 inches. Wood is birch and is about 2 3/4 inches wide

3 Dec 6, 2011
Reply by Bruce W Phillips

"Walter, I seem to always perfer a course thread.  and I would attach the ply to the…"

Michael Campbell replied Nov 28, 2011 to joining plywood to solid wood

5 Jan 29, 2012
Reply by Reys

"Welcome Bud,  This is a great place with alot of talented wood workers.  You will lo…"

Michael Campbell replied Nov 21, 2011 to New to the Group

3 Nov 23, 2011
Reply by James Waller


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


First time I really had a need for the ACS miter guide.

I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue

Tags: ACS

Started by Adam in General Woodworking May 6.

What thread and size screw to use 2 Replies

I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue

Started by Mike Bohannon in Beginners' Zone. Last reply by Jay Boutwell Apr 19.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service