Dresser

[Brad Kruse]

Hi everyone,
I am looking to build a dresser for my daughter. I have seen some nice plans, but I was wondering if anyone has any advice on how to build on with the Kreg jig. I am looking for help and maybe a better plan.
Thank you for your help.

[justin waldron]

The simplest design I've seen is to build a cabinet and make a face frame just as you would for kitchen cabinets and use drawer runners for the drawers. The other thing is to use oak ply. If your dresser is 18 inches deep use a 36 inch piece of ply and run dados where your drawers will go and rip the ply in half. This will give matching dados for both sides. Insert your dust panels into the dado. You can use 3/4 ply for dust panels or use a router and run a 1/4 groove in 4 pieces of poplar and use the pocket screws to make the frame, insert 1/4 ply in the frame before securing the final piece for the frame. You can use slick tape for the sides where the drawer will touch the inside of the dresser. For the exposed plywood I would use 1/4 inch oak (or whatever would you're using) to band it with. The finished product looks much better than using veneer. For the back use a rabbitting bit to put a 1/4 inch piece of oak ply.

[David Dean]

I got one for you and its all its all Kreg jig and easy to build take a look and let me now.
Dave

[Brad Kruse]

I like the taller one, do you have a plan or could you tell me where I could find it?
Thank you for all of your help.

David Dean said:

I got one for you and its all its all Kreg jig and easy to build take a look and let me now.
Dave

[David Roberts]

plansnow.com

[Brad Kruse]

Thank you

David Roberts said:

plansnow.com

[Jens Jensen]

I just finished a dresser and I got plans from Lowe's,It is called Cottage Dresser,if you can find it there Pretty simple 4 drawers and two doors on top.I think I have picture of it on my page

[Jens Jensen]

This is what my dresser looks like

[Jens Jensen]

If you want I will send all plans to it

[Linda Chickering]

Do you still have these plans?  I would like to have them, as well.  Thanks!

Jens Jensen said:

If you want I will send all plans to it

[will delaney]

This is a great site to find project plans made with pocket hole. http://www.thedesignconfidential.com/

[Jens Jensen]

Any one wanting my plans for Cottage dresser go to my home page and look for page 6 the plans are there.

[Melissa Mooren]

I would love plans to this dresser. Could you send me a link to your home page? Thank you so much. You're dresser looks amazing!