Kreg Owners' Community

David Roberts's Discussions (23)

Discussions Replied To (22) Replies Latest Activity

"I have built an outdoor cedar chair with plans from the Kreg site and have no issues…"

David Roberts replied Apr 21, 2012 to is pocket hole connection strong enough for outdoor table rail to leg connection?

3 Apr 21, 2012
Reply by David Roberts

"Why bother take the screws out after gluing?  Only thing I would change is to drill…"

David Roberts replied Nov 15, 2011 to How many pocket holes required?

11 Nov 19, 2011
Reply by Adam Adolph

"Also make sure that your torque when driving in the screws is not too strong. If you…"

David Roberts replied Nov 2, 2011 to Arrrgh. Can't make tight joint with the kreg jig

61 Mar 4, 2012
Reply by Andrew I Harding

"You could use quarter round glued or tacked into  place.  Here's a link to the Rockl…"

David Roberts replied Jun 6, 2011 to Flat Panel Cabinet Doors and routing?

5 Jun 8, 2011
Reply by John Schaben

"I use 2 drill with the Kreg. A corded one when drilling the pocket holes, then a "ch…"

David Roberts replied Oct 9, 2010 to Newbie

4 Oct 9, 2010
Reply by David Roberts

"thanks for everyone's input regarding the trio. it looks cool but i guess it has its…"

David Roberts replied Aug 12, 2010 to Dremel Trio

8 Aug 12, 2010
Reply by David Roberts

"I have a corded for pocket holes and bigger jobs (Dewalt for around 59 bucks), I als…"

David Roberts replied Jun 6, 2010 to What kind of drill should I buy?

79 Oct 24, 2017
Reply by Ken Darga

"I've encountered the same on cedar for my outdoor chairs. I make sure to glue the jo…"

David Roberts replied Jun 2, 2010 to Screws not tightening

32 Sep 6, 2011
Reply by eugene knobloch

"the rockler store is like paradise."

David Roberts replied Apr 2, 2010 to rockler and why I will always shop there

10 Dec 30, 2015
Reply by Elizabeth Leveques

"here's a few i made for my son. i made a rabbet in the back with a router. there is…"

David Roberts replied Mar 22, 2010 to Picture Frames

4 Mar 22, 2010
Reply by Jens Jensen

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Is the screw driver impact drill rater?

Is the screw driver impact drill rated?Continue

Started by Bob Naylor in Beginners' Zone Mar 10.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_