Kreg Owners' Community

November 2009 Product Reviews (7)

Let's get started....

Golf season is over, It's time to get a few projects planned. I've got to finish up a few frames I built last year. Also, I picked up two sheets of Oak Plywood, last fall, very expensive and would like to make a entertainment center, I found some plans last year. Need to find that link again...

The Boy needs some shelves and the Girl need a scratching post and climbing maze for KIA her kitty.....

Added by Jim Soulard on November 24, 2009 at 9:34am — 1 Comment

The Hall Tree

OK, something happened to the first blog post about this project, and I'm tired of seeing a blank page here. Therefore, I'll explain my story again.



When I moved into my current place, there is a nook just inside our front door, immediately to your left as you walk in. Next to that is our front entrance closet, but it's way too small for me, my roommate, and his two kids when he has them over. Something needed to be done, and that nook area was just too barren. I decided to make a… Continue

Added by Don Grubish on November 20, 2009 at 11:00pm — 16 Comments

My voice for KREG

https://www.youtube.com/watch?v=-LnhMFNqRZ4

Added by Jim Kipping on November 10, 2009 at 4:34pm — No Comments

Not just the Voice of the KREG Jig, but a Happy Customer too!!

I had someone hit my blog and recommend I post something here on the KREG Jig site. Sure. Earlier this year, we just did another session where I was the voice for the Kreg Jig infomercial playing around the country. Not the on camera stuff, but the voice work between the shots, and the commercial too. Been doing that for 2 years now?



I just did my first project for our very Italian house we GC's back in 2007. Peggy, my wife, wanted open shelving above the washer and dryer for over 2… Continue

Added by Jim Kipping on November 10, 2009 at 9:00am — 3 Comments

My First Project

Just started my first project using the kreg jig. Its a radiator cover. Though i would share. Still needs to be painted and the grills put on.…

Continue

Added by Anthony Romano on November 6, 2009 at 11:58am — 2 Comments

Long Time ... No Post

Well, cancer treatment followed by vacation / recupration has caused a big gap in posts, but I'm back home now and slowly starting to get back in the shop.



I did get my new router base from Woodcraft, and found that it was too big for the dadomax jig (I'll explain in a later video), but I figured out a way to solve this problem and ordered some nylon set screws from smallparts.com.



Everything is together and I made a test cut with the dadomax and it works good (once I fine… Continue

Added by Kerry Drake on November 5, 2009 at 2:27pm — No Comments

MY $3,000 KREG CABINET

I guess the title probably sparked your interest and yes, there is a small story behind the price. Several years ago we had a new floor installed in our kitchen. Some kind of man made product that resembles ceramic tile. Well . . . the peolpe that sold us the floor did NOT tell us that you should avoid spilling water on the floor and we had to find out the hard way. While my wife and I were at work, one of our cats spilled their water bowl right where four corners of the tile come together and… Continue

Added by Dennis Dorries on November 5, 2009 at 10:30am — 1 Comment

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_