Kreg Owners' Community

I want to make a CROSS out of 2x4s, glued and screwed together and I am not sure where to start. Do I glue two 2x4s (x2)... Has anyone else made a CROSS before.
Thanks,
Bill in Las Vegas

<>/p>

Views: 677

Reply to This

Replies to This Discussion

Bill you need to make a lap joint , if you are using 2 x 4 ,S  , cut a notch 3/4 "  deep x 3 1/2 "  on the cross  part and the same on the up right board , when joined they should be flush , JIM !!

I'm lost Jim. I want to make the thickness two 2x4s, on set of 2x4s about 5 feet tall and the other set of 2x4s about 3 feet tall. I don't know what you call gluing the face of one to the face of the other. Like an Oreo without the cream center. Not side by side like you would a table top but 4" facing the 4". Next time I'll take a picture, even I'm getting confused. ll not -- :-)  Oh yes I put wheels on my screw and nails shelf and painted it Intoxication Green. I'm going for the old hippy look in my work shop. Or maybe deco-barn.  Thanks, Bill in Las Vegas

HI BILL,  first  of all  2 x 4 is 1 1/2 ' x 3 1/2 ", if using a 2 x 4 you will need to cut one  60 "  one  18 " and one 38 1/2 "  for the up right one ,  the 18 " one will be screwed to the top of the 60 " one  and the 38 1/2 " one will be screwed to the bottom of the 60 " one, leaving 3 1/2 " in the center , then you need to cut  one 36 "  long , and two 16 1/4  "   screwed to each  end , leaving 3 1/2 " in the center, the two should over lap to make the cross and be flush , hope this helps , if you have any questions let me know , JIM !!

Oh, I was thinking one long one in the center with the two shorter ones attached  to the sides via my Kreg jig. +

Thanks,  Bill in Las Vegas

That will also work , JIM !!

You could use a 1/2 lap joint at the intersection of your 2x4s. That will work good if you glue and screw it together.

Oh yes 1/2 lap joint. What's that mean. :-) I have never heard of a 1/2 lap joint. Man do I feel dumb, is there a pre-beginner's area. Thanks Dennis. Bill in Las Vegas

That is when you take 1/2 the material from one of the boards to be joined and the other 1/2 from the the other board. When you put them together it makes a joint that is flush on both sides. I wish I knew how to load pics. so I could show you but I am not too computer savvy. Sorry about that.  I hope you understand what I am trying to tell you. You might be able to look 1/2 lap joint on Google. There might be an illustration there or on you tube. I hope this helps you out. Take. Denny

Thanks much, I'll try that when I get bigger. Bill in Las Vegas

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_