Kreg Owners' Community

james wilhelm's Discussions (343)

Discussions Replied To (329) Replies Latest Activity

"high speed on drill and slow on pressure  on drill!!"

james wilhelm replied May 22, 2017 to Pocket Holes

3 Jun 5, 2017
Reply by kn

"I just clicked on the attachment and it down loaded for me !!!!  do not use the Icon…"

james wilhelm replied Jan 17, 2017 to Free Plan: Miter Saw Dust Hood

8 Jan 18, 2017
Reply by KregRep

"Think Tony may be headed in the right direction with his thought !! "

james wilhelm replied Jan 10, 2017 to New plug cutter!!

33 Nov 8, 2020
Reply by Gregg Stemmann

"HI Ronda, you can use your jig saw , still would put on the blue tape just to hold t…"

james wilhelm replied Nov 29, 2016 to New plug cutter!!

33 Nov 8, 2020
Reply by Gregg Stemmann

"HI Ronda, on the standard and micro , scroll saw with table set at 15 degrees  and t…"

james wilhelm replied Nov 29, 2016 to New plug cutter!!

33 Nov 8, 2020
Reply by Gregg Stemmann

"Did cut some standard plug and some HD plugs and took some pics. thought I would pos…"

james wilhelm replied Nov 28, 2016 to New plug cutter!!

33 Nov 8, 2020
Reply by Gregg Stemmann

"Have had the mini , R-3,  K4 master Jig the micro and the HD JIG,S, for 4 years and…"

james wilhelm replied Nov 26, 2016 to Kreg K5. Clamp broke after two weeks

12 Jul 16, 2020
Reply by Jerry S.

"Did try the plug cutter again today , used the HD . cutter , and up the RPM,S  and s…"

james wilhelm replied Nov 26, 2016 to New plug cutter!!

33 Nov 8, 2020
Reply by Gregg Stemmann

"Philip , agree with David , the drum sanders are great and jet makes them in a few d…"

james wilhelm replied Nov 22, 2016 to What Tool Should I Get Next for My Shop?

13 Dec 13, 2016
Reply by Steven Lee

" Thanks for your reply Robert , hope when they become available  you can get one an…"

james wilhelm replied Nov 22, 2016 to New plug cutter!!

33 Nov 8, 2020
Reply by Gregg Stemmann

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

The Pocket Hole Joinery Book - Review

Posted by Daris R. on August 27, 2024 at 8:29pm

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_