Dennis Baker's Discussions (14)

View

Discussions Replied To (10)	Replies	Latest Activity
"That is when you take 1/2 the material from one of the boards to be joined and the o…" Dennis Baker replied Sep 23, 2015 to Project 2 a Garden Cross	11	Dec 30, 2015 Reply by Elizabeth Leveques
"You could use a 1/2 lap joint at the intersection of your 2x4s. That will work good…" Dennis Baker replied Sep 22, 2015 to Project 2 a Garden Cross	11	Dec 30, 2015 Reply by Elizabeth Leveques
"You can try building some leveling legs by drilling holes in the center of the leg a…" Dennis Baker replied Sep 22, 2015 to Wobbling table	10	Oct 28, 2015 Reply by Ken Kortch
"When I build a cabinet I want to put the top on top of the sides. That way you can u…" Dennis Baker replied Sep 19, 2015 to joint placement	7	Dec 4, 2015 Reply by Ken Kortch
"I have used a short #2 square driver and a 1/4" ratchet to drive in screws in a tigh…" Dennis Baker replied Sep 14, 2015 to First Project Nightmare!!!	16	Dec 30, 2015 Reply by Elizabeth Leveques
"I have a K4 master system and love it but I have had it for a number of years. If I…" Dennis Baker replied Sep 14, 2015 to Ready to purchase my very first kit, need some experienced user's opinions please	13	Dec 30, 2015 Reply by Elizabeth Leveques
"I did a practice edge band on a portable work table I made used 3/4 material for the…" Dennis Baker replied Aug 31, 2015 to Edge banding question	7	Dec 30, 2015 Reply by Elizabeth Leveques
"This is interesting I did not know that the HD screws were that much larger in diame…" Dennis Baker replied Aug 31, 2015 to Correct screw length for this joint	23	Dec 30, 2015 Reply by Elizabeth Leveques
"Thank you for the feed back. I sure like mine." Dennis Baker replied Jul 25, 2015 to Kreg Rip-Cut	4	Dec 30, 2015 Reply by Elizabeth Leveques
"Hi LEANN I am Denny Baker I am new to this site I have had my Kreg Jig for a few yea…" Dennis Baker replied Jul 22, 2015 to SQUEALING BITS?	8	Dec 30, 2015 Reply by Elizabeth Leveques

RSS

Welcome to
Kreg Owners' Community

Sign Up
or Sign In

Or sign in with:

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.

Videos

Miter Saw Workbench

Added by Mike Criss

The Ottoman with Secret

Added by Alex DrMaster

How to Build a Shaker Fireplace Surround - Woodworking

Added by Philip Miller

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

1	New Members: Please Introduce Yourself!
2	Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
3	Bench
4	Bench1

Dennis Baker's Discussions (14)

"That is when you take 1/2 the material from one of the boards to be joined and the o…"

"You could use a 1/2 lap joint at the intersection of your 2x4s. That will work good…"

"You can try building some leveling legs by drilling holes in the center of the leg a…"

"When I build a cabinet I want to put the top on top of the sides. That way you can u…"

"I have used a short #2 square driver and a 1/4" ratchet to drive in screws in a tigh…"

"I have a K4 master system and love it but I have had it for a number of years. If I…"

"I did a practice edge band on a portable work table I made used 3/4 material for the…"

"This is interesting I did not know that the HD screws were that much larger in diame…"

"Thank you for the feed back. I sure like mine."

"Hi LEANN I am Denny Baker I am new to this site I have had my Kreg Jig for a few yea…"

Need Help?

Popular Posts & Projects

Videos

Forum

Product Reviews