Kreg Owners' Community

Larwyn's Discussions (74)

Discussions Replied To (72) Replies Latest Activity

"Yes, they are the "support wings" which were part of the K2000 Propack several years…"

Larwyn replied Jan 21, 2010 to Mounting your jig

115 Jul 29, 2011
Reply by Ray Romero

"I mounted mine on a bit 3/4" plywood. Here's a picture of it hanging on the wall. Ac…"

Larwyn replied Jan 21, 2010 to Mounting your jig

115 Jul 29, 2011
Reply by Ray Romero

"Exactly, I have learned not to rely on a clutch setting, in fact when using the Kreg…"

Larwyn replied Jan 20, 2010 to Torque is for headbolts, woodscrews, not so much.

6 Dec 30, 2015
Reply by Elizabeth Leveques

"I have had good results using a fine (maroon) scotch brite pad on a random orbit san…"

Larwyn replied Jan 19, 2010 to Saving tools

5 Dec 30, 2015
Reply by Elizabeth Leveques

"I use impact drivers. Yes, they will overdrive a screw if you let them but you devel…"

Larwyn replied Jan 18, 2010 to drilll/driver vs impact driver

5 Jan 19, 2010
Reply by John Rice

"Yep, it's a good idea to have a spare bit around in case you drill into a nail or sc…"

Larwyn replied Jan 10, 2010 to Shoulder Drill Bit

7 Dec 30, 2015
Reply by Elizabeth Leveques

"Though I seldom use 1" stock, when I do I just use the settings for 3/4 and use glue…"

Larwyn replied Jan 9, 2010 to Kreg Jig K2000

2 Jan 9, 2010
Reply by James R Colloca

"Well, after having a Kreg jig around for a little over 4 years, it seems that just a…"

Larwyn replied Jan 9, 2010 to How has the Kreg Jig changed the way YOU work?

7 Jan 9, 2010
Reply by Larwyn

"I would plane some scrap down to that thickness (7/16"), set the jig for 1/2" and pl…"

Larwyn replied Dec 20, 2009 to How to trick the jig, and use 7/16 wood ?

3 Dec 30, 2015
Reply by Elizabeth Leveques

"I have never had any real problem joining pine with pocket screws. Occasionally a ho…"

Larwyn replied Dec 15, 2009 to joining pine

19 Jan 10, 2010
Reply by Hugh Cameron

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Is the screw driver impact drill rater?

Is the screw driver impact drill rated?Continue

Started by Bob Naylor in Beginners' Zone Mar 10.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_