Kreg Owners' Community

I bought a Kreg ProPack quite some time ago (years) and opened it up last night to use it. I want to join 1" stock. The jig I have is set up to join 1/2, 3/4 and 1 1/2 in stock but not 1" stock. How do I use this jig to join 1" stock.

Views: 280

Reply to This

Replies to This Discussion

Though I seldom use 1" stock, when I do I just use the settings for 3/4 and use glue. Or you can shim the stock until you find a setting that will cause the screw to exit in the middle of the stock, then choose a screw that will give you the amount of penetration you feel is necessary. It's easy if you have a bit of scrap to play around with. I have been using the K2000 for years and have never felt a need to "upgrade". The only moving part on the K2000 is the clamp, sometimes simple is better.
Thanks for the advice, I was just getting ready to play with some different thicknesses to see what would happen. The only other thing I will need to play with is drilling depth, that won't be too hard. I used 1" lumber because it was for a window frame and that was the demension of the old one.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Hard time pocketing 2x4 2 Replies

Hi all,Fairly new kreg user but have had no issues with past small projects using 1x4, 1x6,etc.  Starting a laundry pedestal build that uses 2x4 with pocket holes on te cross braces for top and bottom.  Setting jig on 1-1/2 and setting collar as I…Continue

Started by Heather Mesa in Beginners' Zone. Last reply by Ken Kortch yesterday.

Hanging Project Center

Has anyone found a good solution for hanging the Kreg Project center when it is not in use?Continue

Started by EJ Kenney in Beginners' Zone Sep 4.

Product Reviews

My K4 Master System

I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…


Posted by Randy W. Lush on August 25, 2019 at 12:30pm

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…


Posted by Gary roofner on April 5, 2019 at 10:02am

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service