Kreg Owners' Community

Robert Sanford's Discussions (12)

Discussions Replied To (11) Replies Latest Activity

"Mine is heated in the summer and air conditioned in the winter. If only I could comp…"

Robert Sanford replied Mar 27, 2011 to Do you build more projects in the Summer or Winter?

63 Mar 29, 2011
Reply by Frank Gardecki

"I build in the summer 95% of the time. Here in Michigan with an unheated garage to w…"

Robert Sanford replied Mar 17, 2011 to Do you build more projects in the Summer or Winter?

63 Mar 29, 2011
Reply by Frank Gardecki

"I made my own template as all you need is a four pieces of 1/2" or 3/4" MDF cut to m…"

Robert Sanford replied Nov 23, 2010 to Router and Router table

30 Dec 30, 2015
Reply by Elizabeth Leveques

"First off you might want to look into building a table using a Kreg plate. I did and…"

Robert Sanford replied Nov 11, 2010 to Router and Router table

30 Dec 30, 2015
Reply by Elizabeth Leveques

"try checking the drill stop as drilling just a 1/16th to deep can make the tip come…"

Robert Sanford replied Nov 11, 2010 to My screw tips are showing...please help

11 Dec 7, 2010
Reply by Joseph E. Esquivel

"Nope this is not it as I sent them an email months ago and they had no idea. Thanks…"

Robert Sanford replied Nov 5, 2010 to Need help identifying a band saw

2 Dec 30, 2015
Reply by Elizabeth Leveques

"If you want to become really proficient at hand cutting dovetails I suggest in the l…"

Robert Sanford replied Nov 4, 2010 to Your thoughts on Dovetail jigs

14 Dec 30, 2015
Reply by Elizabeth Leveques

"Try this link for Titebond II florescent http://www.titebond.com/WNTBIIFluorescent.a…"

Robert Sanford replied Nov 3, 2010 to final sanding of a project

15 Dec 30, 2015
Reply by Elizabeth Leveques

"My mistake it is a florescent additive for glues see the forum here http://www.woodw…"

Robert Sanford replied Nov 3, 2010 to final sanding of a project

15 Dec 30, 2015
Reply by Elizabeth Leveques

"Another way is to use the newer glues out that show up under ultraviolet light. Do t…"

Robert Sanford replied Nov 2, 2010 to final sanding of a project

15 Dec 30, 2015
Reply by Elizabeth Leveques

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

1 Parts

Parts

Videos

  • Add Videos
  • View All

Forum

Parts

The Clamp anchor screw broke on my mobile project center.  How can I acquire a replacement?Continue

Started by Jon J Howard in Beginners' Zone 17 hours ago.

Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_