Kreg Owners' Community

A miter saw is one of the handiest tools you can own, and one of the messiest. The chips and sawdust it creates get everywhere. This dust hood helps corral the mess by giving it somewhere to go—into a dust collector or shop vacuum. You can build a hood for your saw from plywood and a few fittings.

Click on the PDF attachment below to access your free plan.

Views: 19361

Attachments:

Reply to This

Replies to This Discussion

Thank you.  I attempted to build a dust hood for my miter saw once but unfortunately made it too small to use at 45 degree angles (not enough clearance).  The good news is it works perfectly on my radial arm saw.

Don

Can't download miter saw dust hood
I can't find the PDF icon to download the dust hood
Cannot find the PDF icon

The PDF file will not open to download.

I just clicked on the attachment and it down loaded for me !!!!  do not use the Icon , it,s the pdf attachment !!

There is no PDF icon or link shown when I use my phone.

Thank you for clarifying. We recommend viewing this page on a desktop computer. Otherwise, you can click on the image to access the PDF file.

Ray Clark said:

There is no PDF icon or link shown when I use my phone.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_