I am planning on making a bunch of deck/outside furniture projects soon out of Cedar. Is that conducive to using the Kreg Jig screws on it and should they be the blue coated ones? Any other suggestions would be appreciated. Two pics attached of one of the projects and of the type of Cedar I want to use.
Tags:
Hi Jan.
The blue-kote screws are the ones Kreg suggests for anything outside. You may also want to look into their deck screws, that I believe are stainless, but they sell them by the bucket.
Zinc screws are recommended for a wide variety of indoor projects where moisture is not a concern.
Blue-Kote™ screws are the best choice for damp or wet applications, and with treated lumber.
Stainless screws are designed for use in extreme applications that are exposed to corrosive elements.
Jan,
Since you plan to use cedar, and cedar is a soft wood,
I'd suggest making some test pieces---
so as to insure you'll get a satisfactory joined member with adequate torque,
to achieve a tight butted joint.
Hi Jan , have just finished a glider made out of knotty Cedar and used the blue coated screws and they should work Ok for your project,s , nice looking patio furniture , well done , JIM !!!
Hi Jan. Like James said, Blue-Kote™ Pocket-Hole Screws are the perfect choice for a wide variety of indoor and outdoor projects. They provide three anti-corrosion layers, rust-resistance up to 400% greater than zinc-plated screws, and work with pressure-treated material. They're available in a variety of sizes, thread options, head styles, and quantities to meet your project needs. Learn more here: https://www.kregtool.com/store/c20/kreg-jigreg-screws/p301/blue-kot....
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service