Kreg Owners' Community

Welcome to the Kreg Owners' Community!
 
This thread is the best place to introduce yourself and let other Community members get to know you. Please include your name, where you're from, your experience building with wood, why you joined this Community, and any other interesting facts about yourself. Also, feel free to share links to your blog, personal website, etc.

Once you've introduced yourself, be sure to check out Helpful Tips for New Members.

We hope that you find great use and enjoyment from the Kreg Owners' Community!

-KregRep

Views: 76952

Reply to This

Replies to This Discussion

Hey, my name is Trey and I am from central Alabama. I am a machinist by trade, and have just now started to work with wood. I am looking forward to learning some good tips.

My name is Joe Foster.  I live in the Denver area.  Wood projects for me are normally book shelf / built in creations.  I hope to give a little and take a little from the community as I customize our new home.

Dwayne,

Fun build project

Rockler shutter jig

http://woodworking.rockler.com/search?w=plantation%20shutters%20jig



Dwayne Treco said:

>>>... I am looking for a jig that I saw on the site or dvd on how to make faux shutters but I can't find it. Can anyone help?

Thanks Dwayne  

Hello.  My name is Mike.  I'm located just outside of Washington, D.C. in Maryland.  I work as a Ministry Coordinator at a local church and I'm fairly new in the woodworking world.  I've had occasion to finish some small projects at home which I've really enjoyed.  I recently purchased the big tool box Kreg Jig set and have already begun a kitchen table and bench project.  Looking forward to learning and sharing with the community at Kreg.

Here is my first project. Tony D. in Central Georgia.

How do you correct the drill throughs?

Hi Anthony, We need more information when you say "correct drill throughs" as it depends on what the "drill through" are in.   Was it a drill going through the jig base of is a drill going through some material you are working on?  It sounds like an improper set bit stop collar or improper setting for the wood thickness if this something you drilled using the jig.  Please let us know more information and we will see what we can do to help you.

Also Welcome to the community and a sincere wish that you will find things here that will enhance your woodworking ventures.

My name is Sonny and I live in the San Francisco Bay Area. Been a Kreg Jig owner since the company introduced the all aluminum Kreg Jig way back when. Still have it and still use it!!! Been very happy with the concept of pocket-hole joinery ever since. The process just works!!!! Definitely consider myself a novice woodworker. Tend to think that I like collecting--or amassing--woodworking tools more than I really like the woodworking. But it sure makes the effort of woodworking a whole lot easier when you have the right tools!!!

Question for my Kreg Friends...  Hoping that someone out there has encountered this type of situation and has found a solution...

Was working on a project and to my utter dismay I run out of my 1.25" pocket hole screws. Of course this happens to me while I'm working one Saturday evening and the most likely place where I can buy some more is closed for the night. On the plus side, I still have a sizable supply of 1.5" pocket hole screws. My project of course entails working with 3/4" material. I have to admit, at that hour of the evening, I really wasn't about to experiment or "attempt at doing the math" to figure out how to best set the collar depth to the pocket hole drill bit. So I had to wait until two days later to replenish my supply of 1.25" pocket hole screws.

For future reference, does anyone know at what depth from the shoulder of the drill bit one should set the depth collar so that I can use 1.5" pocket hole screws on 3/4" material so that I don't have to worry about the point of the screw going through the other side of the adjoining material???

Welcome Sonny,   I am not anywhere close to being able to offer advice but I do know that at Kreg site, they have a video for screw length and how to experiment, what you want to watch for when determining screw length.   You might find it helpful in your particular case.

Hi Rita...

Thank you so much for the quick reply!!!  You wouldn't happen to have a link to direct me to that video that you're referring to, would you??? Or a least a starting point of some sort???

Rita Baske said:

Welcome Sonny,   I am not anywhere close to being able to offer advice but I do know that at Kreg site, they have a video for screw length and how to experiment, what you want to watch for when determining screw length.   You might find it helpful in your particular case.

Sonny,   Go to Kreg Tool Company,  look under pocket screws and then the video for choosing screw length.

This link might help.

http://www.kregtool.com/PocketHole-Screws-and-Plugs-Prodlist.html

Thanks, Rita!!!  Appreciate the help...

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_