I put this together using the Kreg Top Trak kit. Whats showing is a 6 ft section. I have another 2 ft section under way. Of course everything is put together with pocket holes.
The kit came with plans but I deviated some and added the storage bins to it. Adding the dividers of course used up a bunch more screws. The bins are made of 1/4" ply so are not pocket holed. Using 1/2" material in such a small space woulda taken away too much storage.
The red on the counter top is 2 rows of t track that lets me lock the miter station and the support down. It also lets me unlock and slide everything out of the way. I plan on also making stations for the kreg jig, work sharp etc to take advantage of the track.
Tags:
Looks really good, Steven!
Is the 2 ft section for the left side?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service