Kreg Owners' Community


I put this together using the Kreg Top Trak kit. Whats showing is a 6 ft section. I have another 2 ft section under way. Of course everything is put together with pocket holes. 


The kit came with plans but I deviated some and added the storage bins to it. Adding the dividers of course used up a bunch more screws. The bins are made of 1/4" ply so are not pocket holed. Using 1/2" material in such a small space woulda taken away too much storage.


The red on the counter top is 2 rows of t track that lets me lock the miter station and the support down. It also lets me unlock and slide everything out of the way. I plan on also making stations for the kreg jig, work sharp etc to take advantage of the track.

Views: 2649

Reply to This

Replies to This Discussion

yeah, the rulers will be setup so that the 6ft section is on the right and the 2 ft section is on the left but they will be interchangeable. They will also be able to connect to form an 8 ft section.

James Waller said:
Looks really good, Steven!

Is the 2 ft section for the left side?
Looks good.
Have any of you out there built the mitersaw station that is in the June edition of Woodworkers Journal? If so please post any comments about it. I am in the process of building it now. I just received Kreg's kit for it.
Thanks for your opinios.
Mixing a little Festool green with kreg blue. look nice.
Kapex was an awesome craigslist score. I am too embarassed to list what I paid for it. I am definitely hooked on Festool tho, I started with the TS55 and CT22 combo.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_