Kreg Owners' Community

Greg J Powers's Discussions (45)

Discussions Replied To (42) Replies Latest Activity

"Below are some photos of my Kreg router table setup today, some six years later. I…"

Greg J Powers replied Jan 26, 2016 to Kreg router table, self squaring fence and lift

27 Jan 26, 2016
Reply by Greg J Powers

"Not sure as I do not have a table top unit. I would assume it would take some DIY mo…"

Greg J Powers replied Jan 26, 2016 to Kreg router table, self squaring fence and lift

27 Jan 26, 2016
Reply by Greg J Powers

"Not sure as I do not have a table top unit. I would assume it would take some DIY mo…"

Greg J Powers replied Jan 26, 2016 to Kreg router table, self squaring fence and lift

27 Jan 26, 2016
Reply by Greg J Powers

"Milwaukee M12 series is a great set of tools. The newer Fuel M12 are brush-less, so…"

Greg J Powers replied Jan 27, 2014 to What kind of drill should I buy?

79 Oct 24, 2017
Reply by Ken Darga

"I'm glad to see the return of the front mounted clamping handle.  It was strange to…"

Greg J Powers replied Jul 15, 2013 to Introducing the all-new Kreg Jig® K5

51 Dec 30, 2015
Reply by Elizabeth Leveques

"My favorite woodworking shows: 1. Woodwhisper - great instruction, Marc explains ho…"

Greg J Powers replied Jun 18, 2012 to rough cut tommy mac...lame or what? and some other stuff

43 Jan 12, 2015
Reply by Gary roofner

"The new Festool CXS drill is coming out in a few days it looks like a great compact…"

Greg J Powers replied May 22, 2011 to What kind of drill should I buy?

79 Oct 24, 2017
Reply by Ken Darga

"Hillary, They are not Steve photos I posted them, Greg Powers.   The width of the dr…"

Greg J Powers replied Apr 25, 2011 to Kreg Precision Router Table Cabinet Installation

12 Apr 25, 2011
Reply by Hillary Devere

"Thanks for your help. "

Greg J Powers replied Apr 20, 2011 to Raised panel doors - on Kreg router table

3 Apr 20, 2011
Reply by Greg J Powers

"Tried to edit this right after i posted and realized it was in the wrong forum. But…"

Greg J Powers replied Apr 20, 2011 to Raised panel doors - on Kreg router table

3 Apr 20, 2011
Reply by Greg J Powers

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Concealed Hinge Jig Setting Confusion

The Kreg Concealed Hinge Jig has a setting for the distance from edge of the door to the nearest edge of the 35 mm cup hole. This can be set as 3, 4, 5, or 6 mm.Later in the instruction there is a table that converts the distance from the edge of…Continue

Started by Ken Kortch in Kreg Jig® Operation Oct 11.

Help with old Rip-Cut(tm)

I have an old Rip-Cut which I bought many years ago but did not set.  I seem to have lost the instructions, if I ever had them.I cannot figure out which bolts are match with the nylon-lock screws.This unit is old enough that the current instructions…Continue

Started by Sean in Other Kreg® Products Oct 4.

Product Reviews

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 1 Comment

Kreg Jig Dust Collection Attachment

1st impression when you hold this attachment in your hand:  "not much to it", Kreg sure is makin' $$ here.



Then I installed it.. perfect fit, leaves just enough room to adjust the setting screw on my K4.



Then the real test, hook…

Continue

Posted by Grampy Meyer on February 23, 2020 at 11:36am

© 2020   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_