"Whether you’re building a new deck or refinishing an old one, you want to do the job right. With the Kreg Deck Jig™ – and a few simple tools you already own – you can create a beautiful and functional deck surface, completely free of exposed fasteners and painful splinters! Traditional concealed-decking systems utilize awkward steel fasteners or thin plastic clips to hold your deck boards in place. The Kreg Deck Jig™ utilizes a more straight forward approach, creating an incredibly strong wood-to-wood bondthrough precisely placed self-tapping screws.
Layout Mitered Corners, Set 3/16" Reveals, Transfer Measurements, Align / Square Your Projects, Set Bit / Blade Heights, Layout Wall Studs, Use as a Basic Rule, Marking for Layout, Use as a Simple Level"
Tags:
Looks great gary. I'll admit, based on my experience with Trex, I was skeptical but I'm glad it worked out for you. I was thinking the edges might break away around the holes.
I am glad I used the trex. The boards have a solid feel to them no loosness at all no movement at all granted only a month or so time. Just got put the last side of the railing up and build a set of steps off each of the short sides of the deck and put the latice trim around the bottom.
Gary,
Very nice looking.
Thanks for sharing.
Thanks Ken long process as a pay as you go glad its done.
Gary,
Been there---done that.
It's worked out better for me, on many projects.
It just takes proper sequential planning.
BTW---I used the 1'' privacy lattice, surrounding my new deck---so as to keep the critters out---
they can be a real nuisance.
Gary roofner said:
Thanks Ken long process as a pay as you go glad its done.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service