Someone please help?? i have the kreg jr. I am trying to edgeband a 1/2 birch with a 1x3. I put the settings on the kreg jig for 1/2 inch. The screw comes out the middle. But when I try to attach the 1 x3 with 1 1/4 screw it comes out the top of the edgeband on the skinny side. What am I doing wrong? I did lay the 1/2 flat down and flushed the 1x3. Please help? What should I do?
Tags:
How much did it go through? Maybe shorter screws? Why not just glue and clamp the edge banding?
I have put a 1-1/4" edgeband on 3/4" plywood shelves using my K4.
You may have to go down to 1" screws. Can you post a picture of what you have done?
Thank You RCW, I went ahead and tried the shorter screw to the 1' and it worked great!!!
RCW said:
How much did it go through? Maybe shorter screws? Why not just glue and clamp the edge banding?
Thank You Richard, I tried the 1' screws and it worked GREEEAAATTT!! Exactly what I needed. Ill post pictures of it soon when I can figure out how to..Dont me on the website from my phone. Thanks again
Richard Sands said:
I have put a 1-1/4" edgeband on 3/4" plywood shelves using my K4.
You may have to go down to 1" screws. Can you post a picture of what you have done?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service