Kreg Owners' Community

I almost hate to mention this but I was cleaning my shop with my dust collector and cyclone only to notice I sucked up a dust bag that was laying next to miter saw. How embarrassing could that be. Come on admit you have one better than this. We all do stupid once in life time.


Views: 637

Reply to This

Replies to This Discussion

Hey Jens you won't beleive this but I have a remote switch on my d c and yesterday I lost the remote control, this afternoon I was determined to find it. Turns out it was stuck in the first part of the hose from the cyclone to the tools. I used the dust collector hose to clean my workbench off and inadvertenly sucked the little controler up.

Jens this is another one of those post were I could wind up with carpal tunnel syndrome


Now we cant be this dumb

Hey Jens

I don't know about you but in my 55 or so years on this planet I only scracthed the  surfuce of my potential to cause havoc and meyhem in my shop the possibilties are endless,

Just hope it is safe mayhem,

Currently, i would say it's the 1/2" of sawdust that was covering everything...and i mean EVERYTHING in my garage.  Yesterday i thought i'd get off my duff and start sweeping it all up into a nice pile (almost 8" deep).  Upon completion of this monumental task i walked into the house and grabbed a beer so that i could go back and sit in the garage and enjoy the fruits of my labour.  I let the cat out on the way inside. 


So I grabbed that beer, walked back to that clean shop, looked at that damn it dropped a deuce into my giant pile of sawdust. least he covered it up when he was done.

Now that is a embarrassing moment. How funny!!!!!!!!!!!
Ant thing I have tired in the shop except maybe the clean up
Well, not in a woodshop, or home workshop, but when I was a jet engine mechanic.  Getting ready to roll an engine to the test cell, and we were inventorying the tool kit, and we were missing a quarter inch socket.  After an hour of searching, and calling Non-Destructive Inspection to see about getting an x-ray done on the engine, I found it in the rolled up cuff on my jumpsuit leg.
How about embarrassing and very stupid.  About a month ago I couldn't figure out why my saw was spitting out so much dust and leaving terrible saw marks, so I bought a new blade, better, but still s.o.s., so a few weeks later I notice that as I run the piece through the back kerf of the blade was gouging the wood.  I'm thinking, hey!, my blade got bent somehow.. I'd been taking it in and out putting in dado blades, etc.  I buy another blade, guess what?, same thing.  My friend shows up who can barely cut a 2x4 and says "you think your fence is out on the back side?"...... Well guess what?  Sigh..... 
Portable belt sander + trigger lock + thirty foot lead cord + electricity = well you do the math...
I might just have to try that one
I was building a transit bus into a motorcoach. I precut ceiling panels out of 3 layered birch plywood by sized measured. Stained and finished each panel. When I went to put them in place. I had cut them the wrong direction. They only bend in one direction..... The wrong one. SOmetimes, for me it is measure twice and still cut twice.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service