I almost hate to mention this but I was cleaning my shop with my dust collector and cyclone only to notice I sucked up a dust bag that was laying next to miter saw. How embarrassing could that be. Come on admit you have one better than this. We all do stupid once in life time.
Tags:
Hey Jens you won't beleive this but I have a remote switch on my d c and yesterday I lost the remote control, this afternoon I was determined to find it. Turns out it was stuck in the first part of the hose from the cyclone to the tools. I used the dust collector hose to clean my workbench off and inadvertenly sucked the little controler up.
Jens this is another one of those post were I could wind up with carpal tunnel syndrome
Hey Jens
I don't know about you but in my 55 or so years on this planet I only scracthed the surfuce of my potential to cause havoc and meyhem in my shop the possibilties are endless,
Currently, i would say it's the 1/2" of sawdust that was covering everything...and i mean EVERYTHING in my garage. Yesterday i thought i'd get off my duff and start sweeping it all up into a nice pile (almost 8" deep). Upon completion of this monumental task i walked into the house and grabbed a beer so that i could go back and sit in the garage and enjoy the fruits of my labour. I let the cat out on the way inside.
So I grabbed that beer, walked back to that clean shop, looked at that damn cat...as it dropped a deuce into my giant pile of sawdust.
....at least he covered it up when he was done.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service