Kreg Owners' Community

I am planning on making a bunch of deck/outside furniture projects soon out of Cedar.  Is that conducive to using the Kreg Jig screws on it and should they be the blue coated ones?  Any other suggestions would be appreciated.  Two pics attached of one of the projects and of the type of Cedar I want to use.

Views: 2180


Reply to This

Replies to This Discussion

Hi Jan.

The blue-kote screws are the ones Kreg suggests for anything outside.  You may also want to look into their deck screws, that I believe are stainless, but they sell them by the bucket.

Kreg Pocket-Hole Screw Qualities


Zinc screws are recommended for a wide variety of indoor projects where moisture is not a concern.

Blue-Kote™ screws are the best choice for damp or wet applications, and with treated lumber.

Stainless screws are designed for use in extreme applications that are exposed to corrosive elements.


Since you plan to use cedar, and cedar is a soft wood,

I'd suggest making some test pieces---

so as to insure you'll get a satisfactory joined member with adequate torque, 

to achieve a tight butted joint.

Hi Jan , have just finished a glider made out of knotty Cedar and used the blue coated  screws  and they should work Ok for your project,s , nice looking patio furniture , well done , JIM !!!

Hi Jan.  Like James said, Blue-Kote™ Pocket-Hole Screws are the perfect choice for a wide variety of indoor and outdoor projects.  They provide three anti-corrosion layers, rust-resistance up to 400% greater than zinc-plated screws, and work with pressure-treated material.  They're available in a variety of sizes, thread options, head styles, and quantities to meet your project needs.  Learn more here:

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Kreg Circular Saw Track Guide Question

Hi all....Has anyone have experience using a Kreg circular saw track guide system for ripping long boards??? The boards would be 5 to 6 inches wide by 6 feet, I have a Bosch 4100 portable table saw. But ripping boards that length with a 45% angle…Continue

Started by Ed Anderson in Other Kreg® Products Oct 6.


No Description

Started by Joe in Beginners' Zone Oct 1.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service