Kreg Owners' Community

I just got my K5, and it's really nice. However, I cannot find a nozzle to fit the vavuum port, and I can't locate an adapter to make it fit what is available. Woodcraft store just shrugged. Any solution to this?

Thanks,
Barbara Dyer

Views: 595

Reply to This

Replies to This Discussion

Theold extension tubes I had laying around from an old Shop Vac brand shop vac fits mine just right. I use a small shop vac and not the dust collector.

I found an adapter at Rockler.

Try Home Depot. Rigid makes some adapters. Search for "rigid vac adapters"

http://www.homedepot.com/s/rigid%2520vac%2520adapters?NCNI-5

PS---make accurate measurements of the port on your device---

take it with you to check the adaptors, to insure they'll fit.

I've seen some adaptors marker 1-1/2" and they measured 1-1/4" and

 visa versa.

Some of the workers at some of the stores tell you they're the same---

some don't know there's a different.

Akin to a 2x4, that measures 1-1/2 x 3-1/2".

BTW---if you have/find an adapter, that may be a little loose, 

you can simply make a fix by adding a wrap or two of masking tape, (blue or green), around the male end, to make a tigher fight.

You want to the fit to be "snug"---just so it doesn't vibrate loose, or easily come off.

Use a slight twisting motion to tighten/loosen.

 

This kit includes a 1" and 1-1/2" port adaptor.

The port on the Kreg is 1-1/4".

I use this adapter, on my shop vac to the Kreg ports.

http://www.rockler.com/shop-vac-dust-fitting-adapter-for-1-1-4-to-2...

I've also found adapters at vac supply stores.

Take your vac hose with you, when shopping, so as to get the correct match fit.


Robert Melrose said:

OK. Finally got a pic of my setup. I hope this helps.

That small shop vac is WAY more vac than you really need for the K5 port. I can feel the pull when I set the piece in place to be drilled.

[URL=http://s228.photobucket.com/user/BrightwoodTurnings/media/20170323_160629_zps5xb1metm.jpg.html][IMG]http://i228.photobucket.com/albums/ee217/BrightwoodTurnings/2017032...[/IMG][/URL]

Luckily I had recently purchased the Ridgid car cleaning kit and that hose fits.

The Rigid car cleaning kit uses a 1-1/4" hose, so I assume any 1-1/4" connectors would work (for those who don't have a nearby Home Depot.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Hard time pocketing 2x4 2 Replies

Hi all,Fairly new kreg user but have had no issues with past small projects using 1x4, 1x6,etc.  Starting a laundry pedestal build that uses 2x4 with pocket holes on te cross braces for top and bottom.  Setting jig on 1-1/2 and setting collar as I…Continue

Started by Heather Mesa in Beginners' Zone. Last reply by Ken Kortch on Saturday.

Hanging Project Center

Has anyone found a good solution for hanging the Kreg Project center when it is not in use?Continue

Started by EJ Kenney in Beginners' Zone Sep 4.

Product Reviews

My K4 Master System

I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…

Continue

Posted by Randy W. Lush on August 25, 2019 at 12:30pm

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_