Kreg Owners' Community

Robert Melrose's Discussions (22)

Discussions Replied To (20) Replies Latest Activity

"This sofa table I made for my wife. It was the first thing I made for her."

Robert Melrose replied Mar 31, 2017 to The one woodworking photo you're most proud of.

24 Mar 31, 2017
Reply by Glen S

"You would have to build table wings on either side of the saw and come up with a way…"

Robert Melrose replied Mar 31, 2017 to How to use trak and stop kit with a mobile miter saw stand?

1 Mar 31, 2017
Reply by Robert Melrose

"Yes, the router plates are the same size and use the same levelers."

Robert Melrose replied Mar 31, 2017 to Kreg PRS3000 Precision Router Table Lift

5 Mar 31, 2017
Reply by Robert Melrose

"I've found that with Euro hinges and the profile I route into the edges that I need…"

Robert Melrose replied Mar 23, 2017 to Kreg Hinge Jig

8 Mar 23, 2017
Reply by Robert Melrose

"http://www.rockler.com/dust-right-universal-small-port-hose-kit"

Robert Melrose replied Mar 23, 2017 to K5 port

9 Mar 3, 2018
Reply by Ken Kortch

"You could try lining up the leveling blocks to the lift and then drill new screw hol…"

Robert Melrose replied Mar 15, 2017 to Router table

2 Mar 20, 2017
Reply by KregCS

"You would have to drill a hole for that. The Kreg router plates don’t have any mount…"

Robert Melrose replied Mar 14, 2017 to How easy is it to adjust router bit height adjustment with a Kreg Router Table? Can you do it ABOVE the table?

3 Mar 14, 2017
Reply by Robert Melrose

"Guilt Free"

Robert Melrose replied Mar 14, 2017 to Pocket Hole Joinery Guilt?

28 Mar 22, 2017
Reply by Thomas Ellis

"This may sound silly but is the drill turning in the right direction? Clockwise? The…"

Robert Melrose replied Mar 8, 2017 to Difficulty Drilling Pocket Holes and Screws In ACQ Treated Pine

11 Mar 8, 2017
Reply by Robert Melrose

"You can use it on 4x4 stock just not in the clamping fixture. The K-5 should have co…"

Robert Melrose replied Mar 7, 2017 to Beginner here, K-5 jig,

2 Mar 7, 2017
Reply by Robert Melrose

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Is the screw driver impact drill rater?

Is the screw driver impact drill rated?Continue

Started by Bob Naylor in Beginners' Zone Mar 10.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_