Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Troubleshooting thread?Maybe under "Tips for Beginners" since it'd probably be most helpful for newbies? Started by Susan |
1 |
Mar 5, 2011 Reply by James Waller |
Faster DrillingI'm french, so please, be indulgent with my english. I'm not really fluent. I wanted to share with this community the link on a Kreg user… Started by Endy |
22 |
Mar 4, 2011 Reply by Wayne Mclellan |
Question regarding use of joineryI am constructing a picnic table as one of my first few projects using Kreg pocket hole joinery. I converted the original plans that call… Started by Bryan Ebling |
6 |
Mar 1, 2011 Reply by Bryan Ebling |
2 x 4 JoineryAloha to all. . . I picked up R3 Jig kit and I'm looking to build some 2 x 4 units. . . I'm wondering if I can just clamp it and drill the… Started by Tony Calabro |
6 |
Mar 1, 2011 Reply by kenny from Sundre |
90 Degree EDGE Panel Joints - How do YOU keep them from slipping?Hi All! Just tried first Kreg Pocket project in making a 30" x 18 " TV Stand from 3/4 Melamine panels. Used the Kreg 90 degree right angle… Started by Tony Drago |
5 |
Feb 25, 2011 Reply by Jay Boutwell |
Owners manualI have an old Kreg jig that I am rediscovering. It may be the original with two screw holes made for 3/4 stock with an extension for 1/2"… Started by robertjohn527 |
0 | Feb 22, 2011 |
Planter HelpI just got my Kreg a few weeks ago made a table and a foot stool so far. I am trying to make a planter 8 sided cut at 22.5 degrees. Have… Started by Mike Paquette |
4 |
Feb 18, 2011 Reply by John Schaben |
Router Table IssueI have a Kreg Router Table, K-3 Pocket System and lots of other Kreg tools. The fence on my table has a place to "zero" the fence to the bi… Started by Jerry Morgan |
0 | Feb 9, 2011 |
Stop Collar Problem Manufacture Defect ???I have been bit by the dreaded stop collar problem. While building a torsion box and using my Kreg Master system, I had the music going, va… Started by Owen |
8 |
Feb 8, 2011 Reply by John |
how to determine depth stop adjustmentWhen setting the stop collar on the drill bit, how do you allow for the differences in 3/4" plywood thicknesses?The ply I have checks out t… Started by Roger Pozzi |
3 |
Feb 2, 2011 Reply by Owen |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service