Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Flush Trimming pocket plugsHere's a pretty good deal on these things if anyone's interested: http://www.ptreeusa.com/edirect_110411.htm Started by John Schaben |
9 |
Nov 7, 2011 Reply by John Schaben |
HelpThis letter is open to any or all. I'm joining a 1/2" to 1/2" boards. The plans call for a 3/4" screw. I've set the drill and guide to 1/2"… Started by Mike Swaga |
2 |
Nov 5, 2011 Reply by John Schaben |
older Kreg jigMy jig is 15 years old; cast aluminum and used only for 3/4 inch thick material. Do I need to upgrade (buy a new jig) to make holes in 2x2… Started by Frank Densmore |
1 |
Nov 3, 2011 Reply by KregRep |
Kreg drill bit sharpening.Does anyone know how much it costs to have a Kreg drill bit sharpened? I'm assuming it would have to be shipped to Kreg's headquarters. Tha… Started by thetoolnut |
3 |
Nov 3, 2011 Reply by KregRep |
Another Crazy Angle QuestionI am trying to trim out a bay window in a 110 year old house. I want to use 3/4 wood panels. I have figured the angle to be 20 deg. I hav… Started by Stew Millsap |
0 | Nov 2, 2011 |
Loose JointsNo matter what I do, I am not able to get a tight, strong joint after driving the screws when using the jig. I can break the joint apart ea… Started by Bob |
13 |
Oct 31, 2011 Reply by Shift |
Visible markings on your Kreg JigI was woodworking today and had to change the drill collar and the height of the jig. With sawdust on the jig and only impressions for numb… Started by Don Grubish |
25 |
Oct 16, 2011 Reply by Rusty Berkebile |
Looking for help with dado screw set upHey guys, I'm building drawers just like the ones in the following link http://www.flickr.com/photos/garyfixler/3548322988/in/set-721576183… Started by Pat Meeuwissen |
6 |
Oct 8, 2011 Reply by Ken Darga |
Drill speedWhat is the recommended drill speed to use for the pocket holes? I think that I saw or heard that it is 1700 rpm. While we are at it my bat… Started by Gene Chism |
17 |
Sep 30, 2011 Reply by John Schaben |
tight spot to drill??hey guys how do you drill a pocket hole if you are so close to the wall that the clamp doesn't fit behind it Started by Pat Meeuwissen |
2 |
Sep 20, 2011 Reply by Ken Darga |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service