Kreg Jig® Operation (281)
| Discussions | Replies | Latest Activity |
|---|---|---|
Is There a Kreg Jig Screw Matrix Available???Is there a screw size matrix available for the Kreg Jig that tells me if my rail (the piece with the pocket holes) thickness is "x" and if… Started by Stanley C. Pearse |
8 |
Dec 30, 2015 Reply by Elizabeth Leveques |
frame cornersi was making a picture frame, 3/4" stock 2" wide 45 degree angle when i set up for the 3/4" the pocket hole either show thru the finished s… Started by Ron Hootman |
4 |
Dec 30, 2015 Reply by Elizabeth Leveques |
Soft wood to Hard wood problemHi, what screw type would you recommend when joining soft wood to hard wood, like birch plywood to oak. I'm currently having some problems… Started by Tim King |
6 |
Dec 30, 2015 Reply by Elizabeth Leveques |
Correct screw length for this jointI'm going to join 2x4's, such that the pocket holes will go into the 3.5" side of one piece and this will be attached to the 1.5" side of t… Started by Joe |
23 |
Dec 30, 2015 Reply by Elizabeth Leveques |
Pocket Holes: Allowance for material thicknessHi folks. I'm trying to figure out the positioning of the Drill Guide for various material thicknesses, when the Drill Guide is used by it… Started by Anony Mouse |
8 |
Dec 30, 2015 Reply by Elizabeth Leveques |
The ForemanHello all, my name is Jake from Bethel, Ohio. I have been using Kreg products for about two years and this past winter I purchased the Fore… Started by Jake Jump |
8 |
Dec 30, 2015 Reply by Elizabeth Leveques |
How would you attach this?I need to attach a 1/2" thick piece of wood to the edge of a 3/4" piece. I have both the regular and micro jigs but I'm not sure which sett… Started by gale |
12 |
Dec 30, 2015 Reply by Elizabeth Leveques |
Pocket Holes - Bit won't bite unless I press super hard?Using the Kreg R3. I have been mostly working with plywood, but recently started making poplar frames. I purchased a new bit recently and a… Started by Phillip Rosin |
8 |
Oct 23, 2015 Reply by james wilhelm |
K5Drill bit too long for Draper 80001 drill???I've just used my K5 jig for the first time this weekend (built a log store for the porch) and got a Draper 80001 drill to use for drilling… Started by Russ |
8 |
Sep 23, 2015 Reply by Russ |
Pocket joinery over 1 1/5 stockI want to join 2 1/2 inch stock at 90 degree joint using pocket joinery. Does anyone have experience and comments to share on this? Thanks Started by Bob Hovey |
3 |
Aug 26, 2015 Reply by KregRep |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
