Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Sanding IssuesTotal noob question: Sometimes when i sand ply, and go to wipe off the excess dust my rags catch on the wood and leave little fibers hooked… Started by Matt |
1 |
Jan 31, 2014 Reply by Ken Darga |
Adirondack Chair using pocket holesI'm getting ready to build an Adirondack chair based on a design by Norm Abrahm. His design is from the early 90's which is before the tim… Started by Jon Drew |
8 |
Jan 29, 2014 Reply by Tim Wall |
Painting ProjectI am making a Loft bed for my daughter and she has decided she wants to paint instead of staining it. My question is what finish should I… Started by Nicholas Rosenberg |
2 |
Jan 29, 2014 Reply by Ken Darga |
problem setting kreg jig for 1/2 inchI'm not able to figure out how to set my kreg jig for 1/2 inch. If I adjust the drill guide so it is as far down as possible but it is not… Started by Jean Galluccio |
8 |
Jan 28, 2014 Reply by james wilhelm |
Painting toysHi everyone. So I am wrapping up the assembly of a rocking scooter (similar to this http://ana-white.com/2012/05/plans/charlie039s-scooter… Started by Stephen |
3 |
Jan 26, 2014 Reply by Ken Darga |
Wood warppingI am building a coffee table with two drawers in it. I cut up all the wood for it early in summer and had it laying around. after I put i… Started by Kevin Skattebo |
6 |
Jan 26, 2014 Reply by Kevin Skattebo |
Project Plans for Kreg Twin BedDoes anyone know where to get a set of plans for the Kreg twin bed video. Any help would be appreciated. Started by Michael Coughlin |
1 |
Jan 24, 2014 Reply by KregRep |
Use Jig on Hardwood Stair case?I'm finishing 16 hickory treads and 17 risers. I've never installed a stair case before but it doesn't seem like it should be that bad (ma… Started by Chris Meeusen |
0 | Jan 23, 2014 |
This confused meThe K5 is my first Kreg Jig and I've read all the posts from the last two years and was still bewildered. I called support and my issue w… Started by Rob MacGregor |
5 |
Jan 23, 2014 Reply by Rob MacGregor |
refinishing business"Hello my name is Mark Crouch I live in Windsor Mo. I have done some woodworking off and on since I was in high school ( 30+ years ago ). I… Started by Mark Crouch |
1 |
Jan 21, 2014 Reply by Leslee |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service