Kreg Owners' Community

Matt
  • San Diego, CA
  • United States
Share on Facebook
Share Twitter

Matt's Discussions

Sanding Issues
1 Reply

Total noob question:Sometimes when i sand ply, and go to wipe off the excess dust my rags catch on the wood and leave little fibers hooked in there. I found a great way to remove them is with steel…Continue

Started this discussion. Last reply by Ken Darga Jan 31.

Wood for Retaining wall
1 Reply

Anyone know of a good wood that is not treated that can be used for a retaining wall? I dont need to get 1000years of out of it.Right below will be a garden which is why I dont want any leaching from…Continue

Started this discussion. Last reply by Ken Darga Oct 12, 2013.

Drawer Slides
2 Replies

Quick question about drawer slides.I want to add a drawer at the bottom of this LP storage unit . Its 18 1/2 inches from rear to where the false front is now.What size drawer slides should i be…Continue

Started this discussion. Last reply by Jay Boutwell Sep 19, 2013.

MDF Nail Holes
12 Replies

anybody have a good nail hole filler for mdf casing? I know not to use straight up caulking, too messy. Dap ?, wood filler? Its pre-primed and pre-painted by me. Used  a brad nail gun so the holes…Continue

Started this discussion. Last reply by John Schroeder May 3, 2013.

 

Matt's Page

Latest Activity

charles Gonzalez commented on Matt's photo
Thumbnail

Record Bin

"nice!"
Jul 12
Ken Darga replied to Matt's discussion 'Sanding Issues'
"Plywood has a very thin veneer. The softwood veneer material is subject to the wood fibers easily separating and splintering.   Hand sand ---DO NOT USE a power sander. Power-sanders are more aggressive. ( "light-weight"…"
Jan 31
Matt posted a discussion

Sanding Issues

Total noob question:Sometimes when i sand ply, and go to wipe off the excess dust my rags catch on the wood and leave little fibers hooked in there. I found a great way to remove them is with steel wool, but why? Why does that happen? I use an disc sander and sand to 220, then i hand sand one more time.any comments appreciated.NOOB ALERT!See More
Jan 31
Claude Bradford commented on Matt's album
Thumbnail

Record Bin

"Like it, good looking and functional build. A great home for your awesome record collection. Great job!"
Jan 14
Scott G commented on Matt's album
Thumbnail

Record Bin

"Nice box, but what are these "record" things you speak of?  : )"
Jan 8
Matt commented on Matt's album
Thumbnail

Record Bin

"Kreg'ed everything! Added a little glue too. Finished in 2 coats of watco and 1 coat of briwax. Drawer is a little rough as it was my first one. Edge banded the walnut in maple to add some cool lines."
Jan 2
Matt posted a photo

Record Bin

Walnut ply and Maple ply base
Jan 2
Ken Darga replied to Matt's discussion 'Wood for Retaining wall'
"Matt, Scientific studies have proven that any copper that may migrate from the treated wood becomes biologically inactive, thus causing no eco-toxic or other environmental impacts. YellaWood® brand products are gentle enough to be used in raised…"
Oct 12, 2013
Matt posted a discussion

Wood for Retaining wall

Anyone know of a good wood that is not treated that can be used for a retaining wall? I dont need to get 1000years of out of it.Right below will be a garden which is why I dont want any leaching from pre-treated lumber (arsnic or copper).I am also willing to treat with a natural oil, and dont mind doing so every year or what ever it takes.The wall will about 3 feet high-ish. Any wood knowledgeable people who can chime in, I would greatly appreciate!See More
Oct 11, 2013
Matt replied to Ken Kortch's discussion 'Revised Kreg Jig Table for Different Material Thicknesses'
"I use the old one all the time! thanks!"
Oct 2, 2013
Jay Boutwell replied to Matt's discussion 'Drawer Slides'
"Matt, to add a drawer to a cabinet type opening measure the width of the total opening and then deduct one and 0ne-eight from that measurement    That is the finished outside width of the drawer.  Standard slides are 1/2 inch…"
Sep 19, 2013
Rita B. replied to Matt's discussion 'Drawer Slides'
"Hi Matt,  I am certainly no expert but installed my first drawers on a table I recently built.  You would want to construct your drawer box first and take your measurements from that.   Most drawer glides come in…"
Sep 19, 2013
Matt posted a discussion

Drawer Slides

Quick question about drawer slides.I want to add a drawer at the bottom of this LP storage unit . Its 18 1/2 inches from rear to where the false front is now.What size drawer slides should i be looking for, or how do i measure for them?And then I have read to install the slides first and build the drawer second..make sense?Can i put the slides on the base? or do they have to have space under them?thnxSee More
Sep 19, 2013
Matt commented on Scott Aldridge's photo
Thumbnail

Almost organized

"Romney Ryan !"
Jul 26, 2013
Matt replied to KregRep's discussion 'Introducing the all-new Kreg Jig® K5'
"What is going to be on the DVD?"
Jul 15, 2013
John Schroeder replied to Matt's discussion 'MDF Nail Holes'
"great tip ken, thanks...."
May 3, 2013

Profile Information

Which Kreg Jig® or Kreg Products do you own?
Kreg Jig® Master System
How would you describe yourself?
Beginning DIY'er

Matt's Photos

Loading…
  • Add Photos
  • View All

Comment Wall

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

  • No comments yet!
 
 
 

© 2014   Created by KregRep.

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_