Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
kreg production stop extensionI was wondering if anyone has made something to make repeatable smaller cuts that the sides of the miter saw fences with these stops can't… Started by Pat Meeuwissen |
1 |
May 22, 2018 Reply by Brad Martin |
Layout/Project Setup TableIs it easier to just buy the Layout table already set up or to make my own utilizing KREG's Track systems Started by Todd J Michalec12@gmail.com |
11 |
May 22, 2018 Reply by Brad Martin |
Edge joining 3/4 inch plywoodI was wondering if you can join 2 panels of 3/4 inch plywood. If you can, how far apart would you place the screws. The joint I am thinki… Started by Lynn Greff |
2 |
May 20, 2018 Reply by Lynn Greff |
Where can I get a K3 owners manual....the Kreg site does not list it. I Lost mine during a move Started by John Chasse |
3 |
May 19, 2018 Reply by John Chasse |
HELP! Older Kreg Precision Router Fence, need parts!Hello All! I just bought a used ITEM #PRS1010, which is the older Precision Router Table Fence ... This fence ... Click here The selle… Started by Dan Spaulding |
1 |
May 17, 2018 Reply by Dan Spaulding |
designing your projects onlineHi I am interested in designing my own woodworking projects and creating a blueprint and cutlist, does anyone know the best program or webs… Started by Robert Wolf |
4 |
Apr 19, 2018 Reply by KregRep |
Kreg Jig Mini Measurements?Hi All... I purchased the Kreg Jig Mini today, planning on joining some 1" (actual thickness) hardwood stock. Is there a chart that lists… Started by Dan Coes |
26 |
Apr 14, 2018 Reply by Ken Kortch |
Plugs For 2x4'sI just built this desk this past week, wanted to fill the pocket holes, but the 3/8" dowel plugs were not big enough or long enough for the… Started by Dan Smith |
4 |
Apr 9, 2018 Reply by Glen S |
Cabinet constructionI want to build some cabinets for my laundry room and the width inside of the cabinet will be 32.75, is that too wide a span for shelves wi… Started by Michael B |
4 |
Mar 26, 2018 Reply by justin waldron |
Kreg clamp table - Automaxx screw loosens and clamp wobblesHi Recently got a clamp table & stand. The automaxx clamps have screws at bottom which fit into track. The screws turn easily and just… Started by Peter DeGregorio |
1 |
Mar 24, 2018 Reply by Brad Martin |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service