I watched an online video (US source) where someone used Boiled Linseed Oil thinned with Mineral Spirits to finish a job. I don't know what mineral spirits is. I know it's NOT Mineral Turpentine. Is it what we in Australia call White Spirits?
Tags:
White Sprits is mineral sprits in the US.
A mixture of aliphatic and alicyclic C7 to C12 hydrocarbons, white spirit is used as an extraction solvent, as a cleaning solvent, as a degreasing solvent and as a solvent in aerosols, paints, wood preservatives, lacquers, varnishes, and asphalt products. In western Europe about 60% of the total white spirit consumption is used in paints, lacquers and varnishes. White spirit is the most widely used solvent in the paint industry. In households, white spirit is commonly used to clean paint brushes after use.
I
It is odorless and evaporates completely. Besides being used as thinner and cleaner, many woodworkers use it to "preview" how a clear finish on wood would appear.
According to wikipedia.org they are the same. Mineral spirits = U.S. name, white spirits = U.K. name.
Hope this helps, Don
White spirits it's called in the U.K. too .
Boiled linseed oil is used as a wood preservative.
Some oil-based paints & finishes contain boiled linseed oil---
some brands contain more of the oil than others.
Mineral Spirits can be added to thin-down boiled linseed oil.
Thinning of the linseed oil allows deeper penetration into the wood.
You can apply two coats of 50-50 mix then apply the oil full-strength.
Allow 2-3 days drying time between the thinned coats and
5-7 days for full-strength coats.
The oil needs to be dry before applying subsequent coats.
Boiled linseed oil is great for treating wood handles on tools---shovels, rakes, axe, sledges, hammers, and the like.
The tool handles will provide a better slip resistant grip, vs a slippery grip you get from varnished handles.
Sand down the old finish before proceeding.
Apply a thinned-coat followed by a full-strenth coat.
Wipe down the tool handles, with a clean dry-cloth, before putting them into service.
Ken Darga said:
Boiled linseed oil is used as a wood preservative.
Some oil-based paints & finishes contain boiled linseed oil---
some brands contain more of the oil than others.
Mineral Spirits can be added to thin-down boiled linseed oil.
Thinning of the linseed oil allows deeper penetration into the wood.
You can apply two coats of 50-50 mix then apply the oil full-strength.
Allow 2-3 days drying time between the thinned coats and
5-7 days for full-strength coats.
The oil needs to be dry before applying subsequent coats.
Boiled linseed oil is great for treating wood handles on tools---shovels, rakes, axe, sledges, hammers, and the like.
The tool handles will provide a better slip resistant grip, vs a slippery grip you get from varnished handles.
Sand down the old finish before proceeding.
Apply a thinned-coat followed by a full-strenth coat.
Wipe down the tool handles, with a clean dry-cloth, before putting them into service.
Thankyou so much, Ken
Very detailed and helpful reply.
Tom
Tom Wood said:
Ken Darga said:Boiled linseed oil is used as a wood preservative.
Some oil-based paints & finishes contain boiled linseed oil---
some brands contain more of the oil than others.
Mineral Spirits can be added to thin-down boiled linseed oil.
Thinning of the linseed oil allows deeper penetration into the wood.
You can apply two coats of 50-50 mix then apply the oil full-strength.
Allow 2-3 days drying time between the thinned coats and
5-7 days for full-strength coats.
The oil needs to be dry before applying subsequent coats.
Boiled linseed oil is great for treating wood handles on tools---shovels, rakes, axe, sledges, hammers, and the like.
The tool handles will provide a better slip resistant grip, vs a slippery grip you get from varnished handles.
Sand down the old finish before proceeding.
Apply a thinned-coat followed by a full-strenth coat.
Wipe down the tool handles, with a clean dry-cloth, before putting them into service.
Thankyou Michael.
Very useful information.
Tom
michael evans said:
White spirits it's called in the U.K. too .
thankyou Don.
Appreciate your response and assistance.
Tom.
Don Foley said:
According to wikipedia.org they are the same. Mineral spirits = U.S. name, white spirits = U.K. name.
Hope this helps, Don
Thankyou George.
Your information is confirmed and I greatly appreciate that you took the trouble to respond.
Tom
George Kaiser said:
White Sprits is mineral sprits in the US.
A mixture of aliphatic and alicyclic C7 to C12 hydrocarbons, white spirit is used as an extraction solvent, as a cleaning solvent, as a degreasing solvent and as a solvent in aerosols, paints, wood preservatives, lacquers, varnishes, and asphalt products. In western Europe about 60% of the total white spirit consumption is used in paints, lacquers and varnishes. White spirit is the most widely used solvent in the paint industry. In households, white spirit is commonly used to clean paint brushes after use.
I
It is odorless and evaporates completely. Besides being used as thinner and cleaner, many woodworkers use it to "preview" how a clear finish on wood would appear.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service