im looking into buying a multi-tool and what comes to mind would be the dremel http://www.homedepot.ca/product/dremel-multi-max-kit/916712#BVRRWid...
and rockwell http://www.lowes.ca/products/toolguide.aspx
both are on sale right now for $99 and im hoping to get one before the end of this weekend.
the fein brand is definitely not included because of its price --- im just a weekend woodworker/DIYer so a tool that cost that much is not necessary.
anyone can share insight and infos comparing the 2 products i mentioned above?
would really appreciate it coming from those who have used it.
thank you.
Tags:
John,
No, not the diamond blade.
The masonry 3-1/2" dia cutting wheel, is the ''abrasive'' composite material type, available and sized for the Roto-Zip tool--- # RZMAS Masonry Cutting Wheel---ZIP wheel for masonry. For use with the ZIPMATE right angle attachment.
It also effective for cutting plastic material.
Another cutting wheel is available for ''metal cutting''.
Dremel offers smaller size cutting wheels, for use in their rotary tools.
Great tools---handy for many tasks.
John Schaben said:
Hmm, thanks Ken, I wouldn't have thought of the masonary blade. Isn't that the diamond one?
eventually got the rockwell sonicrafter ... was on-sale at lowes.
im liking the 'half-circle' attachment ... it has more control.
they added the adapter so bosch, fein accesories can be used.
thanks for the comments.
John,
The diamond blades will clog up in a hurry, cutting asphalt shingles.
John Schaben said:
Thanks Ken, I've got those blades too. I was thinkin that diamond blade would be a little pricey for me to risk on shingles, the abrasives a lot cheaper.
hi Joey, I had done a good deal of research on these tools and found that there is only one brand of oscillating multi tool that compares with the fein. That is the rockwell sonicrafter it produces the same amount of power at a fraction of the cost. all the others are lower powered units as of the time when i was looking 6 mo. ago.i prefer to "buy a tool once".alot of other tools dont stand up to my type of use.If you feel you will not use the tool regulary the dremel is also a decent unit."just my opinion and the specs the manufactures give"good luck your friend in wood chip making.thanks patrick...i got the rockwell brand. used it right away chipping away and liking it! thanks for your input.
Here's the one I got... the Rigid Job Max. It sort of redefines "MULTI" tool. ;)
http://www.popularmechanics.com/home/reviews/power-tools/ridgid-job...
It has a right-angle drill, a right-angle impact driver, an auto-hammer, an oscillating tool, and a 3/8-in. square drive ratchet. There's even a jig-saw head coming out soon.
I bought the exact model in the link. I have not had great luck with it. It works OK, but it gets very hot, and seems to have a lot of vibration. I have not used other brands, I am guessing they might not have the vibration and heat problems.
Hi Mike - Which link? There are two in the OP and more in the thread.
If you are referring to the Dremel, I agree with the heat. You can help this a bit by making sure your hand doesn't block the cooling vents on the motor but it still runs hotter than I'm comfortable with. As far as vibration, I kinda expected some from an oscillating tool so that doesn't bother me to much. It does get worse as you load up the tool but I think that's kind of a tail wagging the dog thing.
Mike Thompson said:
I bought the exact model in the link. I have not had great luck with it. It works OK, but it gets very hot, and seems to have a lot of vibration. I have not used other brands, I am guessing they might not have the vibration and heat problems.
Allow the cutting tool to do the work---
forcing it will overload and contribute to overheating.
I have a Dremel, and haven't experienced overheating---
of course I don't normally run it continuously, for hours at a time.
Re vibration---
That's the only time I get a buzz---
since I don't drink.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service