Kreg Owners' Community

I would like to create a Kreg Rip Cut compatibility list if it doesn't exist already (haven't found one yet).

Kreg isn't maintaining one (understandably considering the number of types available) . But I think we should be able to create a community one at least.

So please comment if you have tried your Circular saw (don't forget to include model numbers if possible)  with the Rip Cut and how it fitted (Didn't fit at all, Fit's with major adjustments, Fits with minor adjustments, Fits perfectly).

Views: 563

Reply to This

Replies to This Discussion

Ridgid R3205 fits perfect.

Check the cursor every time no matter which saw you have.

Power tool guide (one included with system) rides in the straight edge for total control when cutting or routing.

I've been using this style system, for quite some time, and it hasn't failed me yet.

Very pleased with it's performance and accuracy.

It's available from Rockler Woodworking.

52" to 104" low profile straight edge clamp system.

Features:

  • Clamps for use as a straight edge with a router or circular saw
  • Add the T-fence and it becomes a T-square for laying out your project
  • Connect two 52" sections to create a 104" long straight edge that's long enough for even oversized panels
  • Use just one section as a 52" straight edge, T-square, or for easier storage
  • Includes a write/erase surface for use as a story stick
  • Power tool guide (one included with system) rides in the straight edge for total control when cutting or routing
  • Additional power tool guides sold separately
  • Acrylic base (#42279, sold separately) for use with saw or routers requires the Power Tool Guide Kit (#42173, sold separately).

I also have this style system.

Available from Rockler.

Accessory components are available from Rockler.

''C'' Series All In One Contractor Router Plate

use this one for a router---for cutting rabbets and dados, as well as dressing an edge.

All In One Contractor Saw Plate

and this one for an electric hand saw, for cross-cutting and ripping.

The guide rides in the track of the above clamping system.

Very useful tool and performs well.

These clamping systems are very handy, in the shop and as well as on a job site. 

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

mitered shadow box 1 Reply

Started by Lloyd V. Robichaux, Jr. in Beginners' Zone. Last reply by KregRep on Tuesday.

Can deck jig fastening limit heat expansion? 1 Reply

Started by Glenn Scott in Beginners' Zone. Last reply by Brad Martin on Monday.

Clamp assemblyr 1 Reply

Started by Vince in Beginners' Zone. Last reply by KregRep Jul 9.

Holding 2 pieces together 1 Reply

Started by Scott in Beginners' Zone. Last reply by Tim Grace Jul 11.

Cabinet hardware jig knurled nuts loose

Started by Jeff Thomas in Beginners' Zone Jul 5.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_