KregCS's Discussions (174)

View

Discussions Replied To (174)	Replies	Latest Activity
"Susan, You do not need to put pocket holes on both sides of your piece but this woul…" KregCS replied Apr 15, 2014 to Partition pocket holes	2	Apr 15, 2014 Reply by Susan M. Wolfe
"Trevor, You are welcome! If you have any other issues come up let us know." KregCS replied Apr 8, 2014 to Pocket Holes not deep enough	14	Apr 25, 2015 Reply by james wilhelm
"Dear Trevor, The depth collar should be set based on the step of the bit and not the…" KregCS replied Apr 8, 2014 to Pocket Holes not deep enough	14	Apr 25, 2015 Reply by james wilhelm
"Dear Trevor, I was curious if you were setting your depth collar based on the tip an…" KregCS replied Apr 8, 2014 to Pocket Holes not deep enough	14	Apr 25, 2015 Reply by james wilhelm
"William, If you could send me a message with your address I would be more than willi…" KregCS replied Mar 28, 2014 to Guide Block, accurate?	5	Mar 28, 2014 Reply by KregCS
"William, In order to make the wood plugs seat properly we did make a slight change t…" KregCS replied Mar 25, 2014 to Guide Block, accurate?	5	Mar 28, 2014 Reply by KregCS
"Mark, When using the jig you will not want the bit to come through your material. T…" KregCS replied Mar 24, 2014 to Custom Jig Settings	4	Mar 24, 2014 Reply by Mark J Kristan
"James, For this application you will want to set everything up for 1" and then use y…" KregCS replied Mar 20, 2014 to screw sizes and different size wood	13	Dec 6, 2014 Reply by Wendy Ratcliff
"Tim, That would not be a bad idea since it will seal the board completely. The only…" KregCS replied Mar 3, 2014 to Mantle top	10	Mar 4, 2014 Reply by Tim Barnes
"Tim, If you are screwing from the 2X4 frame into the 3/4" top you will want to set e…" KregCS replied Mar 3, 2014 to Mantle top	10	Mar 4, 2014 Reply by Tim Barnes

‹ Previous
1
…
11
12
13
14
15
…
18
Next ›

RSS

Welcome to
Kreg Owners' Community

Sign Up
or Sign In

Or sign in with:

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.

Videos

Miter Saw Workbench

Added by Mike Criss

The Ottoman with Secret

Added by Alex DrMaster

How to Build a Shaker Fireplace Surround - Woodworking

Added by Philip Miller

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

1	New Members: Please Introduce Yourself!
2	Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
3	Bench
4	Bench1

KregCS's Discussions (174)

"Susan, You do not need to put pocket holes on both sides of your piece but this woul…"

"Trevor, You are welcome! If you have any other issues come up let us know."

"Dear Trevor, The depth collar should be set based on the step of the bit and not the…"

"Dear Trevor, I was curious if you were setting your depth collar based on the tip an…"

"William, If you could send me a message with your address I would be more than willi…"

"William, In order to make the wood plugs seat properly we did make a slight change t…"

"Mark, When using the jig you will not want the bit to come through your material. T…"

"James, For this application you will want to set everything up for 1" and then use y…"

"Tim, That would not be a bad idea since it will seal the board completely. The only…"

"Tim, If you are screwing from the 2X4 frame into the 3/4" top you will want to set e…"

Need Help?

Popular Posts & Projects

Videos

Forum

Product Reviews