Beginners' Zone (1,312)
| Discussions | Replies | Latest Activity |
|---|---|---|
Blokkz just curious if anyone.Has in fact used them, they look more like a pain in the butt in most cases but on some things i do see a value of using them... I only a… Started by Mike |
5 |
Aug 27, 2012 Reply by Ken Darga |
SCREW LENGTH CHARTEarlier I saw a Kreg chart showing the penetration depth of pocket hole screws for different thickness material and different screw length… Started by Terry Hennessy |
2 |
Aug 27, 2012 Reply by James Waller |
sheet good rackHi all I am looking for a good small size sheet good rack on wheels for a small workshop. I can resize if I can find the right looking one… Started by Bill Hooper |
14 |
Aug 24, 2012 Reply by Rick |
Toy Box HingesMy wife and I are building a toy box for a couple expecting their first baby. I have looked at different hinge options and was wondering i… Started by Stephen |
7 |
Aug 21, 2012 Reply by Jay Boutwell |
Joining Different Thicknesses of MaterialHello...I am new to Kreg joinery and I like what it allows me to do. I have build numerous shelf sets for my wife's classroom with relativ… Started by Randy Johns |
3 |
Aug 20, 2012 Reply by James Waller |
Attaching large corbels to wall with Kreg screwsI would like to attach a series of large corbels to a wall to support a long shelf in a Mexican style kitchen. The shelf itself may not b… Started by William David Case |
3 |
Aug 17, 2012 Reply by A.E. "Buddy" Holmes |
I got one for you all have you used this kind of metal in your wood workI have been finding this metal it’s not grant it’s not title it’s plastic so I was wondering why cant I use it for top and other things as… Started by David Dean |
9 |
Aug 16, 2012 Reply by David Dean |
Shaping woodI am making very nice exotic wood cutting boards in anticipation for the coming holidays and I am in need of the proper bit, whether for a… Started by Alfredo R. Vionnet |
13 |
Aug 13, 2012 Reply by Ken Darga |
Chairs made with Kreg toolI don't see any projects for making dining room chairs using the Kreg tool. Why not? Started by Heiner Muller |
8 |
Aug 12, 2012 Reply by Ken Darga |
Lap JointsHowdy All, Just out of curiosity, does anyone know if the Kreg Jig is able to create a full lap joint (ie a technique for joining two piec… Started by Troy |
1 |
Aug 4, 2012 Reply by John Schaben |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
