Tags:
Replacement Belts:
Take the belt with you to an ACE Hardware or True Value Hardware store---
They have a "belt measuring" device---
they stock a large selection of "V" belts.
OPTION(s):
check out Rockler Woodworking and Hardware.
They offer a "link-type belt".
It's adjustable---will fit most table saws, that use "V- belts".
http://www.rockler.com/1-2-power-twist-plus-link-v-belt?source=goog...
Another option may be your nearest auto parts store. If it's an independent or Napa, they can probably measure the old one and get you a replacement. The chain stores may be able to help if they are staffed by car guys and not teenagers that just look up replacement parts.
You probably already know this but make sure the outer edge is as wide on the new one so it doesn't ride in the bottom of the pulleys. I got my Craftsman TS belt at the parts store.
Replacement Belts:
Take the belt with you to an ACE Hardware or True Value Hardware store---
They have a "belt measuring" device---
they stock a large selection of "V" belts.
OPTION(s):
check out Rockler Woodworking and Hardware.
They offer a "link-type belt".
It's adjustable---will fit most table saws, that use "V- belts".
http://www.rockler.com/1-2-power-twist-plus-link-v-belt?source=goog...
Hi Luke,
Thanks for your timely reply.
Glad it worked out for you.
Luke Troughton said:
THANK YOU KEN!!! You couldn't have made it any easier. I took off the old belt. Brought it to my local ACE. They measured it and handed me an exact replacement. All for under $10.00.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service