Is it easier to just buy the Layout table already set up or to make my own utilizing KREG's Track systems
Tags:
Easier to buy but where is the challenge in that?
When you buy, you have to adapt to what it is.
When you build, you make it what you want/need.
Most of us are here on this site because we want to build.
Thanks Brad I appreciate your comment! I will take the challenge and Build this my self, that way I can tweek it to what I feel I need For a layout, assembly bench, Thanks again to You and another member who suggested I take the Challenge of Building What do you suggest for the track system, the
kreg/Rockler tracks or are there some other brands that suffice? Thanks your suggestions will be greatly appreciated and taken into consideration.
Yours in Shop Dust,
Todd J
Brad Martin said:
Easier to buy but where is the challenge in that?
Thanks R.E. Woods I appreciate your comment! I will take the challenge and Build this my self, that way I can tweek it to what I feel I need For a layout, assembly bench, Thanks again to You and another member who suggested I take the Challenge of Building What do you suggest for the track system, the
kreg/Rockler tracks or are there some other brands that suffice? Thanks your suggestions will be greatly appreciated and taken into consideration.
Yours in Shop Dust,
Todd J
R. E. Woods said:
When you buy, you have to adapt to what it is.
When you build, you make it what you want/need.
Most of us are here on this site because we want to build.
I used the Kreg Clamp Track and clamp blocks with Rockler T-track to use their inline clamps so I can use it to make boxes.
2nd bench will be drilled with 3/4 holes at 96mm centres with a downdraft box. I have a panel clamp system that will work with the dog holes and drilled bars. I have Kreg inline clamps and dogs that will allow the Automax clamps to screw into the dog tops rather than use the Kreg adaptor.
Hi Todd,
Thanks for your interest! Both options offer unique benefits. With the Mobile Project Center, no assembly is required, and the tables provide a large 27¾" x 31½" (70x80cm) work surface with 360° access. Learn more on the product page.
Clamping accessories allow you to customize a custom-built workbench. If you are looking for workbench related project plans, our website buildsomething.com is a good place to start.
Happy Building!
KregRep
The work surface is roughly 2 ft. by 4 ft.
Looking good. You might want some clamp blocks too.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Does Keg Easy-Step Collar work with Kreg XL?
Started by Nick in Beginners' Zone. Last reply by Ken Darga Oct 28.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service