Kreg Owners' Community

Welcome to the Kreg Owners' Community!
 
This thread is the best place to introduce yourself and let other Community members get to know you. Please include your name, where you're from, your experience building with wood, why you joined this Community, and any other interesting facts about yourself. Also, feel free to share links to your blog, personal website, etc.

Once you've introduced yourself, be sure to check out Helpful Tips for New Members.

We hope that you find great use and enjoyment from the Kreg Owners' Community!

-KregRep

Views: 76952

Reply to This

Replies to This Discussion

Hi, Rex in North Georgia here.  I've had my eye on some Kreg stuff in the past, but a fencing project finally pushed me over the edge.  I just picked up a K5 Master and the HD insert.  I'm currently attaching my 2x4 fence rails to the 4x4 posts with pocket hole screws.  Probably overkill, I know, but the last fence I paid someone else put up was a flimsy affair.  So, I'm overcompensating.

I've done some very basic woodworking in the past.  I'm mainly limited by free time, so nothing fancy.  I'm hoping to up my game a bit by adding pocket hole joinery to my bag of tricks.

Hi everyone, I'm Barney from north west NJ. I have been on this site many times, enjoying all the good information on here as well as all of the creative work you guys have done. Finally becoming a member. 

My name is Carlos and live in the Dallas, TX area. I have been woodworking for a long time until I stopped a few years because of an illness. I got a Kreg tool kit for Christmas and I am ready to start using it.

Hi all,

thanks for the add.  As a youngster I did a lot of wood working over the years.  I lost my way and am now just getting back intowoodworking in my spare time.  Will be looking for advice as I build up me tools.  I do not have a lot of Kreg gear but like what I see and would like to start off with a Router table system and like the sound of the Kreg unit.  Any advice in this area would be great what ever I get will need a riser and a good quality 1/2” router.  I am currently doing a couple of restoration jobs including a two door vegetable storage cupboard and a double bed.  Looking forward to being an active member of the group.

Hi Everyone my name is Kirk I'm from Johannesburg South Africa. I work in the procurement dept of an Aviation firm. I have very little experience working with wood which is why I joined the Kreg Owners club. I recently purchased the K4 system.

Hi my name is mark I am from Swindon and am just starting journey in hobby wood working.

My name is Ed, living in Northern NY. I am retired and we are in the process of restoring a 1947 Craftsman home. I love to build and love communities like this to expand my knowledge and skills. I recently purchased the Kreg Pocket Hole system and love using it for many things.

Hi,my name is David and I live in Colchester,Ct.I am a Ct Home Improvement contractor and I am interested in expanding my skill set to  furniture building and wood working.Thats my reason for joining the kreg owners community and I believe I can get great ideas,project plans and knowledge from  joining.I am new to owning Kreg products and I enjoy  Kreg products,because I can produce quality work,with quality tools.

Hello, my name is Lee and I live in Casper, Wy.  I have been doing woodworking all my life, I also work with metal, plastic, and anything else that works for a project.  Amateur Radio buff - Call Sign AE7SF and also Astronomy when I get a chance with my 9 1/4" telescope.

Hi there!

My name is Ed, and I am from Sydney, Australia. Entered the woodworking world 2 years ago, and since then - flying ahead on a full steam! Kreg jig was one of the first tools I bought, and now I own quite a few of these blue devices, including the project centre, K5 and HD jigs, Rip-cut, square cut, plug cutter and quite a few clamps. 

First project was a king size bed insert, made mainly with 2x4s and Kreg HD screws... Turned out to be strong enough to carry over 200 lb/sq ft :). Then - chairs, TV stand... As I said, full steam ahead.

Looking forward for more!

Thanks for the add to the group. New hobby for me but the K4 jig system got me really excited about working with wood again. Looking for project ideas and ways/tools to hone my skills.

Dave-Mesa, AZ

Hi have already replied, to New members ,

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_