Tags:
mr. pensavalle
Why use kreg plugs i'm not trying to be a smart #$% but i have been useing wood pouty for a long time but there is a down side that i have learned after sanding and stain i have to get the plyurethane on or some time's it well fall out.
dave
Dave,
See my topic "using the Kreg plugs". I found out that the plugs come in one length and that length is to allow them to be use in 2 x 4 lumber. If you are using anything like the normal 3/4" lumber, you have to lop off about 3/16 to 1/4 inch off the blunt end or be prepared to use a chisel or a lot of sanding. I found the easiest way for me was to use my stationary scroll saw to do the trimming. Watch the fingers......LOL. Another down side is that you might not be able to find plugs in matching wood or wood that will stain up the same as your project wood. However if your plugs are placed well, it can add an appealing look to your project. I don't think that Kreg offers it, but there are commercially available plug cutter jigs for pocket holes if you plan to do a lot of pocket hole joinery or if you want to guarntee that your plugs are from the same wood as you are using.
I hope the added information helps.
Andy
Have you guys seen the video where they trim the plugs (after gluing them in the hole) with a trim router and a flush bit? To get into tight corners, you need an offset trim router, which I don't have (yet). Looks pretty easy, though.
Dave:
I agree with you about "WATCHING THE FINGERS" when cutting off the blunt end of plugs. I cut plugs on my band saw using a pair of pliars to firmly grip the tapered end of the plug. I also make sure the entire plug is laying flat on the band saw table when cutting it to keep it straight during the cutting process. Finally, It is a good idea to wear eye protection because the part being cut off can snap and fly back towards your face.
Paul H.
Andrew Pensavalle said:Dave,
See my topic "using the Kreg plugs". I found out that the plugs come in one length and that length is to allow them to be use in 2 x 4 lumber. If you are using anything like the normal 3/4" lumber, you have to lop off about 3/16 to 1/4 inch off the blunt end or be prepared to use a chisel or a lot of sanding. I found the easiest way for me was to use my stationary scroll saw to do the trimming. Watch the fingers......LOL. Another down side is that you might not be able to find plugs in matching wood or wood that will stain up the same as your project wood. However if your plugs are placed well, it can add an appealing look to your project. I don't think that Kreg offers it, but there are commercially available plug cutter jigs for pocket holes if you plan to do a lot of pocket hole joinery or if you want to guarntee that your plugs are from the same wood as you are using.
I hope the added information helps.
Andy
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service