Hello all, my name is Jake from Bethel, Ohio. I have been using Kreg products for about two years and this past winter I purchased the Foreman. I'm having an issue I hope someone can help me with. When I use the Foreman I noticed the pocket holes were not as deep as they are on the benchtop model. No matter what I have done it's still the same. I have tried different size bits, moving the depth around, but still the same. Anyone have any suggestions for me?
Tags:
Jake , would call customer service in the morning , 800-447-8638, sure they can help you , JIM !!
Jake,
Peruse the instructions--go thru each step, and double-check your setups.
I don't have any issues with mine.
Obtain some scrap material and make some practice pieces.
Jake,
I'm sorry to hear that you are having issues with your Foreman. It sounds as if you need to adjust the depth setting on your jig. This will allow the bit to penetrate deeper than you are currently experiencing. What thickness of material you are working with? If you could please let us know, we would be more than happy to walk you through the set up process. You may contact us directly by phone at 800-447-8638 or by email at technicalsupport@kregtool.com
Jake , would call customer service in the morning , - 800-447-8638, sure they can help you , JIM !!
Jake,
I'm sorry to hear that you are having issues with your Foreman. It sounds as if you need to adjust the depth setting on your jig. This will allow the bit to penetrate deeper than you are currently experiencing. What thickness of material you are working with? If you could please let us know, we would be more than happy to walk you through the set up process. You may contact us directly by phone at 800-447-8638 or by email at technicalsupport@kregtool.com
Jake , would call customer service in the morning , - 800-447-8638, sure they can help you , JIM !!
Jake , would call customer service in the morning , - 800-447-8638, sure they can help you , JIM !!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service