Inserting pocket screws into 2x4

[Ed]

Hello all,

I'm new to this community and I'm really hoping someone can help me with my dilemma...

I'm building a gate out of 2x4 and I've mitred the angle out of 2 45 degree angles ( I know it's really 1.5"x3.5") and I'm using the R3 Kreg pocket jig.... I know it's a small one but its all I have until I can afford the bigger K4 model....

I've realized that you should put 2 pocket holes one on each side of the joint line...but the problem I'm having is that after I have put the the first pocket hole 1/2" in from the heel...I've done that but how while I'm dealing with the 45 degree how do I position the jig 2.5" in from the toe...

I'm sure it's something really simple but I've done a few practice attempts with no success

As shown in the pic diagrams attached

[Ed]

Yes great job JIM.... Thank you

[james wilhelm]

ED , you are very welcome , glad I could help, that is what this site  should be about , wood workers helping each other , have a good day , JIM !!

Ed said:

Yes great job JIM.... Thank you