Tags:
Greetings to all from Indiana. I enjoy woodworking and motorcycles. I have used a Kreg jig for some time now building bookcases and such. But it is now time to get into some harder projects,lol.
Hi all, my name is Mark, I live in SW ON (Canada). I'm a beginner woodworker and new to the Kreg jig. Well, I started setting up the shop about eight years ago, and dabbled in woodworking a little over the years before that, but I'm not home very often and don't get to spend a lot of time in my favourite playground so I probably have beginner-level knowledge. I joined this community when I had a particular question, but working wood is my passion and I look forward to getting the most out of the jig through tips I pick up in here. I'd be happy to share my experiences with others as well, of course.
Howdy! I'm Aubrey from Fort Worth, TX. I'm hoping to learn more about the use of Kreg Jigs and tools.
Hi adam welcome to the forum a great resource for anything wood .Lots of friendly people ,oh by the way I live in oxford ,mick.
hi mick' im currently off work with a broken leg, so im just going to trawl the site,and others for ideas for the up comming summer! thanks for reply
michael evans said:
Hi adam welcome to the forum a great resource for anything wood .Lots of friendly people ,oh by the way I live in oxford ,mick.
Adam said:
Hi Adam!
Your next project could be a set of "CUSTOM CRUTCHES" !
hi mick' im currently off work with a broken leg, so im just going to trawl the site,and others for ideas for the up comming summer! thanks for reply
michael evans said:Hi adam welcome to the forum a great resource for anything wood .Lots of friendly people ,oh by the way I live in oxford ,mick.
Sorry to hear adam about the broken leg ,guess you made some wooden splints then ha.
ha i wish, i was mid way through a mini project when it happend, so my garage is upside down
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service