Kreg Owners' Community

Has any one used or have any knowledge about Ted's wood working plans. I saw an add on the web and was considering ordering them. Just was wondering if any one here has tried them.

Views: 965

Reply to This

Replies to This Discussion

What type of plans are you looking for? 

Try some free plans at:

http://ana-white.com/

http://www.thedesignconfidential.com/

http://www.woodworkingplanfinder.com/plans/free/

I hope this helps!  I've not heard of Ted, btw. 

WARNING john, do not touch those particular plans,heard some very unfavourable comments about that particular site.

Good advice Michael.  I just google'd Ted and it looks like there are scam alerts a plenty!

Thanks, That's kind of what I thought


 
michael evans said:

WARNING john, do not touch those particular plans,heard some very unfavourable comments about that particular site.

Thanks, I think your right
 
Justin Everett said:

Good advice Michael.  I just google'd Ted and it looks like there are scam alerts a plenty!

Thank you, I will look at those. I am fairly new to wood working, but I have found that I like it and now that I am older and some what retired I want to spend more time at it. I was searching the web for plans and project ideas when I came across Ted's. I was a little suspicious when I looked at it. Thank you for your reply. 
Justin Everett said:

What type of plans are you looking for? 

Try some free plans at:

http://ana-white.com/

http://www.thedesignconfidential.com/

http://www.woodworkingplanfinder.com/plans/free/

I hope this helps!  I've not heard of Ted, btw. 

I just started too.  I found that Ana-White has some easy, practical and beautiful plans.  Good luck!

John DeMucha said:

Thank you, I will look at those. I am fairly new to wood working, but I have found that I like it and now that I am older and some what retired I want to spend more time at it. I was searching the web for plans and project ideas when I came across Ted's. I was a little suspicious when I looked at it. Thank you for your reply. 
Justin Everett said:

What type of plans are you looking for? 

Try some free plans at:

http://ana-white.com/

http://www.thedesignconfidential.com/

http://www.woodworkingplanfinder.com/plans/free/

I hope this helps!  I've not heard of Ted, btw. 

Agree with all other comments , stay away from teds plans 

Ted's plans are a scam. You will get plans, but you'll be disappointed. Plus, the plans are the information is taken from other sources without permission, they are disorganized, the videos are things you can find elsewhere, etc. Plus, they give addresses for correspondence, etc. that don't exist. Publishers and others who've had their plans ripped off have been trying to get this shut down for a while, but they're based outside the U.S., making it extra challenging.

Thanks for all the replies and information.

I've had good luck with plansnow.com. Not a huge selection, but you may find something there.

 On Steve Ramsey's site Woodworking for Mere Mortals.com said, that Ted's woodworking plans is what Dave Stone said it is a bad setup. You get partial plans or just pictures, no plans at all.  John, don't waste your money on scammers. Get plans from like Kreg, plansnow.com, there is a site called 1000 free plans.com. I use them every time I need an idea or a plan. Good luck in your search.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_