Setup for different size woods

[phil vouers]

I think I have this figured out but just want to check. If joining a 3/4 piece to a 2x4 should I set everything up for 3/4 BUT use the 2 1/2 screws?

[james wilhelm]

Phil , I  have a chart from Kreg , that shows  3/4 to 1 1/2  boards is 3/4 jig setting with 2 " screws, hope this helps , try this on some scrap boards  first , by drilling the holes in the 3/4 " board and screw into the 2x4 ,s JIM

[phil vouers]

thanks.. is this chart available somewhere???

[phil vouers]

watched the video and it made much more sense.. thanks for the help

[james wilhelm]

Phil , it is posted on this main page and on my home page

phil vouers said:

thanks.. is this chart available somewhere???

[phil vouers]

Thanks.. found it.. fantastic