Where is a good spot to find plans for a Tile top coffee table?
Tags:
Thanks Ken but this link takes me to a page where i can buy picture tile ans books. My Problem is trying to figure out how to build the top so that the tile fits flush.
Frank, it appears the first one was cut short...
hmmm...
perhaps cut twice and it still to short
Try again
https://www.google.com/search?q=tile+top+coffee+table+plans&hl=...
http://plansnow.com/tables.html
http://www.lulu.com/us/en/shop/andrew-r-phillips/tile-top-coffee-ta...
http://www.woodweb.com/knowledge_base/Building_a_TileTopped_Table.html
Frank,
Secure the tiles to a sound foundation---
then add a ''trim'' surrounding the tiles---
position the trim so it's flush with the surface of the tiles.
a. make a table with legs, of a size and style, you desire
b. install a plywood base, so as to secure the tiles and provide a solid foundation
c. locate cross (1x4) members at right angles to the plywood---spaced at 12'' apart---
secure cross members to the table apron
d. install tiles
e. install trim, molding, or the like.
(trim molding, but not limited to, ''baseboard'' material, or the like.
ex: http://www.bhg.com/home-improvement/molding-trim/designs/
f. finish to suit
Frank Windsor said:
>>>.... My Problem is trying to figure out how to build the top so that the tile fits flush./p>
There are plenty of easy tile top coffee table plans out there to make your first project a success. You can go to any woodworking supply store, and even larger bookstores, and get a book with dozens of woodworking plans. You can even find some free plans and project ideas online if you are on a budget.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service